Konica Minolta KIP 7100 KIP 7100 User Guide

Konica Minolta KIP 7100 Manual

Get Konica Minolta KIP 7100 PDF manuals and user guides View all Konica Minolta KIP 7100 manuals
Add to My Manuals
Save this manual to your list of manuals

Konica Minolta KIP 7100 manual content summary:

  • Konica Minolta KIP 7100 | KIP 7100 User Guide - Page 1
    KIP 7100 ‐ User Manual Version A1
  • Konica Minolta KIP 7100 | KIP 7100 User Guide - Page 2
    -Function Printer KIP 7100. This Hardware Operation Guide contains functional and operational explanations for the KIP 7100. Please read this Hardware Operation Guide carefully before using the printer. Please keep this Hardware Operation Guide for future reference. 1. When this product is installed
  • Konica Minolta KIP 7100 | KIP 7100 User Guide - Page 3
    the operator or operation of the printer. The following symbols are found throughout the USER'S Manual and have the following meaning: WARNING instruction. CAUTION This CAUTION mark means that there is a possibility of injury or physical damage if you ignore or do not follow the said instruction.
  • Konica Minolta KIP 7100 | KIP 7100 User Guide - Page 4
    Use a circuit with a dedicated breaker. 3. Install the product as close to the wall outlet as possible. 4. If you wish to move the printer, please contact your service personnel. 1. Do not remove the screw and do not open the cover if not instructed to do so in this User's Manual. If you ignore this
  • Konica Minolta KIP 7100 | KIP 7100 User Guide - Page 5
    room or a dusty room. Also, do not install the printer on an unstable floor as injuries may occur. 1. Unplug the printer before you move it. The power cord may be damaged and it may result in a fire or electric shock. 2. If you do not use the printer for a long duration (holidays, company shutdown
  • Konica Minolta KIP 7100 | KIP 7100 User Guide - Page 6
    POWER CORD INSTRUCTION The installation of (or exchange to) a power plug which fits in the wall outlet of the installation location shall be conducted in accordance with the following: WARNING Select a power plug which meets the following criteria; - The plug has a voltage and current rating
  • Konica Minolta KIP 7100 | KIP 7100 User Guide - Page 7
    Before Use 1. 1 Installation Requirements 1. 2 Originals Prohibited from Duplication 1. 3 Features 1. 4 Specifications 1. 4. 1 General 1. 4. 2 Printer part 1. 4. 3 Scanner part 1. 5 Appearance 1. 5. 1 Front view 1. 5. 2 Rear view 1. 6 Specifications for the Scan Original 1. 7 Specifications for the
  • Konica Minolta KIP 7100 | KIP 7100 User Guide - Page 8
    installation of the equipment. 1. POWER SOURCE should be rated as follows. In U.S.A. : 120V plus/minus 10 Photoconductive Drum to strong (intense) light as this will damage the Drum. must be ample to sustain the weight of the equipment. (Rear) 30cm/12" or larger KIP 7100 L* R* (Front) 80cm/32
  • Konica Minolta KIP 7100 | KIP 7100 User Guide - Page 9
    government to copy private issued securities (stock certificate, draft, check, goods ticket, etc.), commutation ticket or book of tickets, excluding that some specific company copies such originals as many as it requires for its own business. 2. We recommend you not to copy freely such originals as
  • Konica Minolta KIP 7100 | KIP 7100 User Guide - Page 10
    KIP 7100 is a single footprint Multi-Function Printer which can copy, scan and print. Advanced drivers and comprehensive print utilities make the KIP 7100 an advanced, easy to use system. (some functions may be optional) (2) KIP HDP technology generates no waste toner. (3) The combination of the KIP
  • Konica Minolta KIP 7100 | KIP 7100 User Guide - Page 11
    Subject Model Configuration Power consumption (Maximum) Power consumption (Low power mode) Acoustic noise Ozone Dimensions Weight Environmental condition for usage Interface Rating Input Power Specification KIP 7100 Console 1,440W (US model) 1,680W (EU / Asia model) (scanner / controller included
  • Konica Minolta KIP 7100 | KIP 7100 User Guide - Page 12
    Printer part Subject Printing method Photoreceptor Print speed Print head Resolution of print head Print width Print length Specification LED Array Electro photography Organic Photoconductive Drum toner NOTE The above specifications are subject to change without notice. 1-6 Chapter 1 Before
  • Konica Minolta KIP 7100 | KIP 7100 User Guide - Page 13
    Media source Media Storage of consumables Specification 2 Roll Decks Manual Feeder (single cut sheet) Paper Tray Toner cartridge) Store the cartridge within the temperature range from 0 to 35 degrees Centigrade and within the humidity range from 35 to 85% RH. NOTE The above specifications
  • Konica Minolta KIP 7100 | KIP 7100 User Guide - Page 14
    1. 4. 3 Scanner part Subject Scanning method Light source Setting of original Starting point of scan Scan width Scan length Margin area Optical resolution Digital resolution Original transportation Transportable original thickness Specification Contact Image Sensor (CIS) (5 pieces of A4 sized CIS)
  • Konica Minolta KIP 7100 | KIP 7100 User Guide - Page 15
    view 10 5 6 2 7 8 9 4 3 2 11 12 7 1 No. Name Function 1 Main Switch You can turn on/off the KIP 7100. 2 Original Guides Feed the original under the Scanner Unit along the Original Guides. 3 User Interface 4 Emergent Stop Button This is a Touch Screen, and many kinds of user operation
  • Konica Minolta KIP 7100 | KIP 7100 User Guide - Page 16
    the LAN Cable to connect the KIP 7100 to the network. (Do not connect a telephone line) Turn on the Dehumidify Heater with this switch when you would like to dry the paper in the humid season. It is possible to shut off supplying the AC power. Connect the Power Cord here. For an optional device
  • Konica Minolta KIP 7100 | KIP 7100 User Guide - Page 17
    the following specifications. Thickness 0.05mm to 1.6mm Width 279.4mm to 914.4mm Length 210mm to 6,000mm (If an original is thicker than 0.65mm, its image quality is not guaranteed even it is transported.) Do not scan the following kinds of originals. The original or the scanner may damage
  • Konica Minolta KIP 7100 | KIP 7100 User Guide - Page 18
    Not square Wet Metal or fabric material Rough surface (Carbon paper for example) Clipped or stapled KIP KIP Metal Wet Fabric KIP KIP Rough surface Clipped Stapled KIP KIP 1-12 Chapter 1 Before Use
  • Konica Minolta KIP 7100 | KIP 7100 User Guide - Page 19
    The following kinds of originals can be read with using a carrier sheet. Image quality or the reliability of paper feeding for them is not guaranteed. Patched Punched 1-13 Chapter 1 Before Use
  • Konica Minolta KIP 7100 | KIP 7100 User Guide - Page 20
    1. 7 Specifications for the Printing Paper 1. 7. 1 Papers not available to use Do not use the following kinds of printing paper. Doing so may damage the print engine. Excessively curled (a diameter of 50 mm or less) Folded Creased Torn Punched 1-14 Chapter 1 Before Use
  • Konica Minolta KIP 7100 | KIP 7100 User Guide - Page 21
    print image or paper creasing if you use a paper that does not satisfy the specification. (4) Do not use a paper of which surface is very special, such of the tracing roll paper from the beginning is recommended. Refer to [2.3 Replacing Roll Media]. 1. 7. 2 Keeping the paper in the custody Keep the
  • Konica Minolta KIP 7100 | KIP 7100 User Guide - Page 22
    (%) Low 40% 70% High Possible problem "Void of image", "crease of paper" and other problems occurs when you print with plain paper . (if installed) 2. Remove the paper from the machine right after the completion of print, and keep it in a polyethylene bag. NOTE (1) KIP 7100 is equipped with
  • Konica Minolta KIP 7100 | KIP 7100 User Guide - Page 23
    Chapter 2 Basic Operation 2. 1 Turning on KIP 7100 2. 2 Turning off KIP 7100 2. 3 Replacing Roll Media 2. 4 Replacing Toner Cartridge 2. 5 Cut Sheet Media 2. 6 Copying 2. 7 Emergency Stop of Scan or Copy 2. 8 Canceling Sleep Mode 2. 9 Dehumidifying Roll Media 2-1 page 2- 2 2- 4 2- 5 2-11 2-15 2-16
  • Konica Minolta KIP 7100 | KIP 7100 User Guide - Page 24
    the following conditions. In the U.S.A. : 120V plus/minus 10%, 50/60Hz and 15A In Europe : 220-240V plus 6% or minus 10%, 50/60Hz and 10A 2. Press " | " side the Power Switch on the right side of the printer to turn on the KIP 7100. Power Switch Press " | " side. 2-2 Chapter 2 Basic Operation
  • Konica Minolta KIP 7100 | KIP 7100 User Guide - Page 25
    Screen in one minute. The Ready Indicator on Copy Mode Screen will flash during warming up. Ready Indicator The UI screen may vary depending on your system configuration. (Shown with available options) 4. When Ready Indicator stops flashing, the KIP 7100 is ready for operation. NOTE It is impossible
  • Konica Minolta KIP 7100 | KIP 7100 User Guide - Page 26
    off KIP 7100 1. There is a Power Switch on the right side of KIP 7100. Press its " " side to turn off the KIP 7100. Power Switch Press " " side. CAUTION The KIP 7100 print engine and UI appear to be shut down when you turn off KIP 7100. However, the controller PC embedded inside the KIP 7100 is
  • Konica Minolta KIP 7100 | KIP 7100 User Guide - Page 27
    2. 3 Replacing Roll Media NOTE (1) A paper mis-feed tends to occur just before out of a roll paper. (2) A tracing roll paper is recommended to be loaded to Roll Deck 1 (front). Reference This section describes how to install a roll media to Roll Deck 1. The same procedure is applied to Roll Deck 2,
  • Konica Minolta KIP 7100 | KIP 7100 User Guide - Page 28
    3. Raise the green lever (4) on Flange (2). Remove both Flanges (4) from the roll core (3). 3 4 2 2 3. Move a right Slide Guide (5) to match your roll media's width. The right and left Side Guides will automatically move together. Width markings 5 5 2-6 Chapter 2 Basic Operation
  • Konica Minolta KIP 7100 | KIP 7100 User Guide - Page 29
    4. Insert each Flange (2) into both ends of the roll media core to be installed. 2 NOTE (1) Fully insert Flange into the roll media core so that the inside rim of Flange evenly touches the side face of the roll media.
  • Konica Minolta KIP 7100 | KIP 7100 User Guide - Page 30
    Correct: Edge comes from bottom Wrong: Edge comes from top (2) The outside rim (6) of Flange should meet the black triangle (7) marked on Slide Guide. Otherwise the roll media may fall in Roll Deck or result in an incorrect media feeding. 7 7 6 6 Correct Wrong 2-8 Chapter 2 Basic Operation
  • Konica Minolta KIP 7100 | KIP 7100 User Guide - Page 31
    clockwise so that the feeding rollers catch the leading edge. 8 8 9 NOTE Use the rear Feed Knob (10) for Roll Deck 2. 10 8. Hold the green grip (11: on the middle of Guide Plate) and turn Guide Plate outside. With holding, rotate Feed Knob (9) again so that the leading edge comes out in 100mm
  • Konica Minolta KIP 7100 | KIP 7100 User Guide - Page 32
    portion. 12 NOTE Completely slide Cutter Knob (12) until it stops at either end. Not doing so may cause a paper jam. 12 12 Correct Wrong 10. Gently close Roll Deck. NOTE Be sure to close the Roll Deck fully until it locks at the correct position. A paper jam may occur if
  • Konica Minolta KIP 7100 | KIP 7100 User Guide - Page 33
    2. 4 Replacing Toner Cartridge 1. Open the Toner Hatch (1). 1 2. Slide the green Lever (2) to the right to unlock the Toner Cartridge. (Lever (2) is held automatically.) 2 NOTE Be sure to unlock the Toner Cartridge by releasing the green Lever (2). 2 2 Correct: disengaged Wrong: not disengaged
  • Konica Minolta KIP 7100 | KIP 7100 User Guide - Page 34
    the machine or on the floor if you remove the Toner Cartridge without closing the toner supply hole (5). 5 4. Pressing down the Cartridge Lock Lever (3), bring up the left side of the Toner Cartridge first, and then remove the whole cartridge from the machine. 3 2-12 Chapter 2 Basic Operation
  • Konica Minolta KIP 7100 | KIP 7100 User Guide - Page 35
    Lock Lever (3), fit the pin (6) on the left side of the cartridge to the groove (7) on the machine side. 6 7 3 NOTE Please confirm that the Cartridge Lock Lever (3) firmly locks the Toner Cartridge at the correct position. (It must be at a level position.) Good No good 3 3 2-13 Chapter
  • Konica Minolta KIP 7100 | KIP 7100 User Guide - Page 36
    7. Turn the body (4) of the cartridge in one revolution to the arrow direction to open the toner supply hole. Confirm that the projection (8) if fitted into the notch (9). 4 8 9 NOTE It is not necessary to lock the cartridge with the Lever (2). Lever (2) will engage on its own after closing the
  • Konica Minolta KIP 7100 | KIP 7100 User Guide - Page 37
    avoided. "Curl up" sheets tend to result in a mis-feed. Correct (curl down) Incorrect (curl up) (2) Setting a cut sheet to the Bypass Feeder while the printer is processing a print job cause a paper jam. 2-15 Chapter 2 Basic Operation
  • Konica Minolta KIP 7100 | KIP 7100 User Guide - Page 38
    with Original Guides (1). When the leading edge touches the original feeding roller, the machine automatically carries and sets the original at the proper position. 1 3. The KIP 7100 will start the copy process. NOTE The scanner unit does not accept originals automatically during Sleep Mode. Tap
  • Konica Minolta KIP 7100 | KIP 7100 User Guide - Page 39
    the top tray, the printer will inform you of "Tray Full" on exceeding capacity of stacking. If the UI screen shows "Tray Full", remove all the prints on the top tray. For further information of switching top / rear ejection, see KIP IPS Touch screen Operator's Guide. 2-17 Chapter 2 Basic Operation
  • Konica Minolta KIP 7100 | KIP 7100 User Guide - Page 40
    or Copy 1. If necessary, press the Emergency Stop Button (1) on the Scanner Unit to immediately stop the original while making a copy or scan. 1 Pressing the button stops the current reading a document immediately. The current printing is stopped as well and is ejected. NOTE Do not pull back or
  • Konica Minolta KIP 7100 | KIP 7100 User Guide - Page 41
    Mode The KIP 7100 has two Sleep Modes to reduce the power consumption. The KIP 7100 will enter Sleep Mode after a certain period of inactivity. In the default setting; • Warm Sleep Mode will start after a 15 minute of inactivity in order to reduce the power supply for Fuser Unit. • Cold Sleep Mode
  • Konica Minolta KIP 7100 | KIP 7100 User Guide - Page 42
    humidified; If the KIP 7100 is installed in such a problems above may be resolved. NOTE KIP 7100 is equipped with the Dehumidify Heater (optional for the US) If needed, contact the service personnel for detail. To turn on the Dehumidify Heater, press the H side of the Dehumidify Heater Switch
  • Konica Minolta KIP 7100 | KIP 7100 User Guide - Page 43
    Manual Jam 3. 1. 3 Reg. Jam / Internal Jam 3. 1. 4 Fuser Jam 3. 1. 5 Stack Jam 3. 1. 6 Original Jam 3. 1. 7 Accessory Jam 3. 2 Other Operator Call Error 3. 2. 1 Roll Replacement 3. 2. 2 Toner Empty 3. 2. 3 Cutter Set NG 3. 2. 4 Scanner Unit Open 3. 2. 5 Printer Not Available 3. 3 Service Call Error
  • Konica Minolta KIP 7100 | KIP 7100 User Guide - Page 44
    3. 1 Mis-feed Error NOTE (1) Be careful not to get paper cuts on your hand. (2) It is recommended to take off your ring, bracelet or watch when removing a paper is mis-fed in the Roll Deck. 1. Pull the blue lever (1) to unlock the Roll Deck. Draw out the Roll Deck. 1 3-2 Chapter 3 Error Correction
  • Konica Minolta KIP 7100 | KIP 7100 User Guide - Page 45
    Insert the leading edge of the roll media under Guide Plate (2) until it touches the feeding roller. Rotate Knob (4) for Roll Deck 2. 4 3. Hold the green grip (5: on the middle of Guide Plate) and turn Guide Plate outside. With holding, rotate Feed Knob (3) again so that the leading edge comes out
  • Konica Minolta KIP 7100 | KIP 7100 User Guide - Page 46
    sure to close the Roll Deck fully until it locks at the correct position. A paper jam may occur if it is not locked firmly. 3-4 Chapter 3 Error Correction
  • Konica Minolta KIP 7100 | KIP 7100 User Guide - Page 47
    3. 1. 2 Manual Jam 1. Remove Print Trays (1). 1 1 2. Pull up the Engine Unit Open Levers (2) to open the the Engine Unit firmly until it locks at the correct position. (2) The mis-feed cut sheet should be replaced with a new one if its leading edge has a torn or fold. Or it should be used upside
  • Konica Minolta KIP 7100 | KIP 7100 User Guide - Page 48
    paper. 4. Gently close the Engine Unit. mis-fed media NOTE Be sure to close the Engine Unit firmly until it locks at the correct position. 5. Replace Print Trays in the original position. 3-6 Chapter 3 Error Correction
  • Konica Minolta KIP 7100 | KIP 7100 User Guide - Page 49
    seen or removed, leave the media and go to the next step. 4. Hold the gray handles and open the Exit Cover (3). mis-fed media 3 3 3-7 Chapter 3 Error Correction
  • Konica Minolta KIP 7100 | KIP 7100 User Guide - Page 50
    the next step. jammed print NOTE If removed a mis-fed paper inside the Exit Cover, scattered toner can be adhered to the next print. 6. Hold the white handle (4) and release the Fuser paper inside the Fuser Door, scattered toner can be adhered to the next print. 3-8 Chapter 3 Error Correction
  • Konica Minolta KIP 7100 | KIP 7100 User Guide - Page 51
    7. Close Fuser Door (5) and Exit Cover (3). 5 3 8. Gently close the Engine Unit. NOTE Be sure to close the Engine Unit firmly until it locks at the correct position. 9. Replace Print Trays in the original position. 3-9 Chapter 3 Error Correction
  • Konica Minolta KIP 7100 | KIP 7100 User Guide - Page 52
    [3.1.4 Fuser Jam] for the later procedure of clearing the jammed print. jammed print 5. See [3.1.4 Fuser Jam] for the later procedure of clearing the jammed print. 3-10 Chapter 3 Error Correction
  • Konica Minolta KIP 7100 | KIP 7100 User Guide - Page 53
    NOTE Press down Scanner Unit on both the sides to close it. Do not close it by pressing only one side down. 3. 1. 7 Accessory Jam The printing paper is mis-fed in the optional device such as Auto Stacker or Folder. Remove the mis-fed paper making reference to the User's Manual of concerning device
  • Konica Minolta KIP 7100 | KIP 7100 User Guide - Page 54
    Printer Not Available If the Exit Cover or the Engine Unit is open (not closed properly), the UI screen shows "Printer Not Available". Please check that either Exit Cover or Engine Unit is firmly closed. If it seems no problem, turn off and again on the machine's power switch. 3-12 Chapter 3 Error
  • Konica Minolta KIP 7100 | KIP 7100 User Guide - Page 55
    of the above errors appear: 1. Turn off KIP 7100, and turn it on after an interval of 30 seconds or more. 2. If the same error code appears, turn off KIP 7100, and then unplug the printer from the wall outlet after an interval of two minutes for shutdown. Call your service personnel. 3-13 Chapter
  • Konica Minolta KIP 7100 | KIP 7100 User Guide - Page 56
    Chapter 4 Maintenance 4. 1 Cleaning 4. 1. 1 Scanner Unit 4. 1. 2 Touch Screen 4-1 page 4- 2 4- 2 4- 4 Chapter 4 Maintenance
  • Konica Minolta KIP 7100 | KIP 7100 User Guide - Page 57
    is recommended to clean each Scan Glass, Feeding Rollers and Guide Plates as the scan/copy image may become defective if these parts are dirty. 1. Turn off KIP 7100. 2. Press the levers (1) up to unlock the Scanner Unit. Open the Scanner Unit. 1 1 3. Wipe each Scan Glass (2), Press Rollers (3) and
  • Konica Minolta KIP 7100 | KIP 7100 User Guide - Page 58
    4. Wipe the Feed Rollers (4), Press Rollers (5) and the inside surface with a soft dry cloth. 5 4 4 5. Gently press Scanner Unit down and firmly close it. NOTE Press down Scanner Unit on both side to close it. Do not close it by pressing only one side down. 4-3 Chapter 4 Maintenance
  • Konica Minolta KIP 7100 | KIP 7100 User Guide - Page 59
    4. 1. 2 Touch Screen 1. Wipe the Touch Screen with a dry cloth. NOTE Do not use water, alcohol, organic solvent and glass cleaner for the cleaning. 4-4 Chapter 4 Maintenance
  • Konica Minolta KIP 7100 | KIP 7100 User Guide - Page 60
    Multi-Function Printer KIP 7100 Hardware Operation Guide Version A.1 (Issued on May 25, 2010) Published by Katsuragawa Electric Co., Ltd. 21-1 Shimomaruko 4-Chome, Ohta-ku, Tokyo 146-8585, Japan Please note that some
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
Version A1
KIP 7100
‐
User Manual