Konica Minolta KIP 7100 KIP 7100 User Guide - Page 50
Do not touch any parts in the Heater Unit, or you will be burnt.
View all Konica Minolta KIP 7100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 50 highlights
5. Pull and remove the jammed print to the rear. If you remove the print at this time, just close the Exit Cover. If the print cannot be removed, go to the next step. jammed print NOTE If removed a mis-fed paper inside the Exit Cover, scattered toner can be adhered to the next print. 6. Hold the white handle (4) and release the Fuser Door (5). Pull and remove the jammed print to the rear. 4 5 jammed print WARNING There are extremely hot parts inside the Fuser Door. Do not touch any parts in the Heater Unit, or you will be burnt. Also be careful not to get burnt when you touch the printing paper as it may be very hot. NOTE If removed a mis-fed paper inside the Fuser Door, scattered toner can be adhered to the next print. 3-8 Chapter 3 Error Correction