Konica Minolta Kodak Ngenuity 9090DC User Guide - Page 84
Using the imprinter, Print position: hardware
View all Konica Minolta Kodak Ngenuity 9090DC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 84 highlights
Using the imprinter Print position: hardware Imprinter operation is controlled via the hardware and software. To print a string on the scanned document, adjust the position of the print head carriage according to the size of the sheets that you want to scan. Print positions Carriage tab • Move the carriage to align the carriage tab with one of the marks that appears on the scale on the imprinter. For the print string to appear on the right side of the page, move the carriage to the right side of the scale. For the imprint to appear on the left side of the page, move the carriage to the left side of the scale. NOTE: If the carriage is not properly aligned with one of the marks on the scale, the imprinter will not print on the document. The following chart shows the position of the imprint in reference to the document sheet being scanned. B-10 Make sure the document being scanned is the correct size for the printing position or the imprinter will not print on the document. A-61662 October 2011