Konica Minolta Kodak ScanMate i1150 User Guide - Page 21
Cleaning procedures, Cleaning the rollers
View all Konica Minolta Kodak ScanMate i1150 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
Cleaning procedures Your scanner needs to be cleaned periodically. If your documents do not feed easily, if several documents feed at the same time or if streaks appear on your images, it is time to clean your scanner. The section entitled, "Supplies and consumables" at the end of this chapter provides a listing of the supplies required to clean your scanner. IMPORTANT: Only use cleaners such as those provided through Kodak Parts Services. Do not use household cleaners. Allow surfaces to cool to ambient temperature before use. Do not use cleaners on hot surfaces. Use adequate ventilation. Do not use cleaners in confined areas. NOTES: • Before cleaning, disconnect the electrical power. • Wash your hands with soap and water after performing maintenance procedures. Cleaning the rollers 1. Open the scanner cover. 2. With a roller cleaning pad, wipe the feed rollers from side to side. Rotate the feed rollers to clean the entire surface. IMPORTANT: The roller cleaning pad contains sodium lauryl ether sulfate which can cause eye irritation. Refer to the MSDS for more information. 3. Dry the rollers with a lint-free cloth. 4-2 A-61816 September 2014