Konica Minolta Kodak i1320 Plus User Guide - Page 31

CAUTION: Use caution as the release lever is spring-loaded

Get Konica Minolta Kodak i1320 Plus PDF manuals and user guides View all Konica Minolta Kodak i1320 Plus manuals
Add to My Manuals
Save this manual to your list of manuals

Page 31 highlights

2. Holding onto the separation module, rotate the release lever back so you can access the separation roller. CAUTION: Use caution as the release lever is spring-loaded and will snap back if you do not hold it in place. 3. Remove the separation roller from the separation module housing. 4. Remove each tire by sliding the tire off the core. A-61560 January 2010 5. Install each new tire by gently pulling it over the core. IMPORTANT: Do not overstretch the tire, it may tear. 6. Reinstall the separation roller in the separation roller housing. Be sure the separation roller snaps into place. 7. Reinstall the separation module by aligning the tabs with the slots and snapping it into position. 4-9

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
A-61560
January 2010
4-9
2.
Holding onto the separation module, rotate the release lever back
so you can access the separation roller.
CAUTION: Use caution as the release lever is spring-loaded and
will snap back if you do not hold it in place.
3.
Remove the separation roller from the separation module housing.
4.
Remove each tire by sliding the tire off the core.
5.
Install each new tire by gently pulling it over the core.
IMPORTANT: Do not overstretch the tire, it may tear.
6.
Reinstall the separation roller in the separation roller housing. Be
sure the separation roller snaps into place.
7.
Reinstall the separation module by aligning the tabs with the slots
and snapping it into position.