Konica Minolta ProJet 3510 HD Cube3 User Guide - Page 93
UPDATING THE CUBE FIRMWARE, Updating Firmware Using Wi-Fi
![]() |
View all Konica Minolta ProJet 3510 HD manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 93 highlights
UPDATING THE CUBE FIRMWARE The printer firmware can either be updated via wireless connection or by using a USB mass storage device. NOTE: Whenever a firmware update is performed, you must perform the Auto Level procedure and then the Auto Gap procedure. Updating Firmware Using Wi-Fi 1. Select SETUP. 2. Navigate to the System 3 screen and select FIRMWARE. 3. Select WIFI. NOTE: The printer will attempt to connect to the server. 3D Systems, Inc. 89
![](/manual_guide/products/konica-minolta-cube-cube3-user-guide-43708ee/93.png)
89
3D Systems, Inc
.
UPDATING THE CUBE FIRMWARE
The printer firmware can either be updated via wireless connection or by using a USB mass storage device.
NOTE: Whenever a firmware update is performed, you must perform the Auto Level procedure and then the Auto
Gap procedure°
Updating Firmware Using Wi-Fi
1°
Select
SETUP
°
2°
Navigate to the
System 3
screen and select
FIRMWARE
°
3°
Select
WIFI
°
NOTE: The printer will attempt to connect to the server°