Konica Minolta bizhub 363 bizhub 423/363/283/223 Network Scan/Fax/Network Fax - Page 141
Restrictions for printing
View all Konica Minolta bizhub 363 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 141 highlights
6.6 Printing upon data reception 6 Restrictions for printing The following lists the restrictions on printing documents. - Documents are printed in reduced size if the print paper size is smaller than that determined in Step 1. - If [Print Separate Fax Pages] is set to [OFF], documents are automatically rotated by 90 degrees if the orientation of the print paper does not match with that determined in Step 1. - To print multiple-page documents of mixed size, the functions and settings described in this section are determined for each page. - If the paper size determined in Step 1 and 2 is loaded in multiple paper trays, the paper tray is selected according to the setting specified in [Auto Tray Selection Settings]. - If only the bypass tray is assigned for the thus determined paper size, feed paper from the bypass tray for printing. However, if the bypass tray is not included in the options of [Auto Tray Select] in [Auto Tray Selection Settings], the bypass tray cannot be used for feeding paper. - If [Print Separate Fax Pages] is set to [ON], and [TX/RX Settings] in the Utility menu configured as follows, documents are not divided. - A specific tray is assigned in [Tray Selection for RX Print]. - [Min. Reduction for RX Print] is set to [Full Size]. - [Print Paper Selection] is set to [Fixed Size] or [Priority Size]. - [Duplex Print (RX)] is set to [ON]. - If the selected-size paper is not loaded in the paper tray, a message appears prompting you to load the paper of the size. - If [Print Paper Selection] is set to [Priority Size], any one of the paper sizes 8-1/2 e 11, 8-1/2 e 14, or 11 e 17 (A4, B4, or A3) is selected as optimal paper size. If the selected-size paper is not loaded in the paper tray, the paper size is selected according to the normal procedure. - If [Print Paper Selection] is set to [Fixed Size], any one of the paper sizes 8-1/2 e 11, 8-1/2 e 14, or 11 e 17 (A4, B4, or A3) is selected as optimal paper size. If the selected-size paper is not loaded in the paper tray, a message appears prompting you to supply the paper of the size. The message remains displayed until the paper is loaded in the paper tray. - If [Tray Selection for RX Print] is set to other than [Auto], documents are printed on the paper loaded in the paper tray (except the bypass tray) specified in [Tray Selection for RX Print]. If the specified paper size is smaller than that of the received document, the document is printed in reduced size. If the paper tray runs out of paper, a message appears prompting you to supply the paper of the size. The message remains displayed until the paper is loaded in the paper tray. - If [Print Paper Selection] is set to other than [Auto Select] and [Tray Selection for RX Print] is set to other than [Auto], higher priority is given to the setting in [Tray Selection for RX Print]. d Reference For details on [Print Separate Fax Pages], refer to page 10-19. For details on [Auto Tray Selection Settings], refer to the [User's Guide Copy Operations]. For details on [Tray Selection for RX Print], [Min. Reduction for RX Print], [Print Paper Selection] and [Duplex Print (RX)], refer to page 10-19. bizhub 423/363/283/223 6-12