Konica Minolta bizhub 363 bizhub 423/363/283/223 Network Scan/Fax/Network Fax - Page 37
Press this key to display the Guidance screen.
View all Konica Minolta bizhub 363 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 37 highlights
3.1 Control panel No. Name 6 Utility/Counter 7 Reset 8 Interrupt 9 Stop 10 Proof Copy 11 Start 12 Data Indicator 13 C (Clear) 14 Keypad 15 Guidance 16 Enlarge Display 17 Accessibility 18 Access 19 Brightness dial 20 User Box 21 Fax/Scan bizhub 423/363/283/223 3 Description Press to display the Utility screen and the Meter Count screen. Press to clear all settings (except programmed settings) entered using the control panel and touch panel. Press this key to enter Interrupt mode. While the machine is in Interrupt mode, the indicator on the Interrupt key lights up in green and the message [Now in Interrupt mode.] appears on the touch panel. To cancel Interrupt mode, press the Interrupt key again. Pressing the Stop key during scanning temporarily stops the scan operation. Press this key to print a single proof copy to be checked before printing a large number of copies. You can check the finishing state on the touch panel by pressing this key before scanning or copying. Press this key to start scanning. When this machine is ready to begin a scan operation, the indicator on the Start key lights up in blue. If the indicator on the Start key lights up in orange, scan operation cannot be started. Press this key to restart a stopped job. Flashes in blue while a print job is being received. Lights up in blue when data is being printed. Press to erase a value (such as the number of copies, a zoom ratio, or a size) entered using the keypad. Press this key to enter the number of copies, zoom ratio, and various other settings. Press this key to display the Guidance screen. From this screen, you can view descriptions of the various functions and details of operations. ress to enter Enlarge Display mode. If you use PageScope Authentication Manager for authentication, the Enlarge Display screen is not available. Press this key to display the screen for configuring settings for user accessibility functions. If user authentication or account track settings have been applied, press this key after entering the user name and password (for user authentication) or the account name and password (for account track) in order to use this machine. Press this key to log off from the machine as well. Use this dial to adjust the brightness of the touch panel. Press this key to enter User Box mode. While the machine is in User Box mode, the indicator on the User Box key lights up in green. For details, refer to the [User's Guide Box Operations]. Press this key to enter Fax/Scan mode. While the machine is in Fax/Scan mode, the indicator on the Fax/Scan key lights up in green. 3-3