Konica Minolta bizhub 421 bizhub 361/421/501 Network Scan/Fax/Network Fax Oper - Page 135
To output in full size
View all Konica Minolta bizhub 421 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 135 highlights
Receiving data (G3/IP/I-FAX) 5 5.6.3 2 Note For information on [Auto Tray Selection Setting], refer to the User's Guide [Copy Operations]. When [Print Separate Fax Pages] is set to [ON], printing is not output on separate pages if [TX/RX Settings] in the Utility mode screen is set as follows: - A fixed tray is specified using [Tray Selection for RX Print]. - [Min. Reduction for RX Print] is set to "×1.0". - [Print Paper Selection] is set to [Fixed Size] or [Priority Size]. - [Duplex Print (RX)] is set to [ON]. 2 Note For details on [Tray Selection for RX Print], [Min. Reduction for RX Print], [Print Paper Selection], and [Duplex Print (RX)], refer to "Fax Settings - TX/RX Settings" on page 9-23. If no paper applicable for printing is prepared, a message appears, prompting to set paper. - When [Print Paper Selection] is set to [Priority Size], either 8-1/2 × 11, 8-1/2 × 14, or 11 × 17 (A4, B4, or A3) is selected as the optimal paper size. If paper of that size is not in the tray, the standard paper selection is performed for printing. - When [Print Paper Selection] is set to [Fixed Size], either 8-1/2 × 11, 8-1/2 × 14, or 11 × 17 (A4, B4, or A3) is selected as the optimal paper size. If paper of that size is not in the tray, a message is displayed until paper of the relevant size is supplied. - When [Tray Selection for RX Print] is set to an option other than [Auto Paper Select], paper in the paper tray specified for [Tray Selection for RX Print] (except for the bypass tray) is used for printing. If the width of the paper is smaller than that of the received document, printing is performed in a reduced mode. If the specified paper tray is empty, a message is displayed until paper of the relevant size is supplied. - When [Print Paper Selection] is set to an option other than [Auto Select], and [Tray Selection for RX Print] to an option other than [Auto Paper Select], the setting for [Tray Selection for RX Print] is given priority. To output in full size If [Min. Reduction for RX Print] is set to "×1.0", paper of the same size is used for printing in full size. If paper of the same size is not prepared, paper of a larger size is used for printing. Original Received original Printing to equal size ! Detail Separate-page printing is not available. An image larger than the 11 × 17 (A3) size cannot be printed out. If paper of the optimal size is not in the tray, a message is displayed until paper of the relevant size is supplied. 501/421/361 5-11