Home » Konica Minolta Manuals » Multifunction Devices » Konica Minolta bizhub 501 » Manual Viewer

Konica Minolta bizhub 501 bizhub 361/421/501 Enlarge Display Operations User M - Page 56

Selecting a Paper Size setting for the bypass tray

View all Konica Minolta bizhub 501 manuals

Add to My Manuals
Save this manual to your list of manuals

Page 56 highlights

Using copy functions 2 2.10.2 Selecting a Paper Size setting for the bypass tray The paper size can be set for the bypass tray so that it can be used with the specified paper size. 2 Note For details on loading paper, refer to the User's Guide [Copy Operations]. The paper size can be selected for the bypass tray in any of the following ways. Setting Description Auto Detect Custom Size*1 Select this setting to automatically detect the size of the paper loaded into the bypass tray. A custom paper size can be set so that the paper tray is used specifically with the selected paper size. *1 In order to specify a custom paper size in Enlarge Display mode, the custom paper size must first be stored before entering Enlarge Display mode. For details, refer to the User's Guide [Copy Operations]. 2 Note The other trays than the bypass tray cannot be specified with a paper size. 1 In the Basic screen, touch [Paper]. The Paper screen appears. 501/421/361 2-29

Section	Page
Introduction	2
Contents	4
1 Before use	8
1.1 Names of control panel parts and their functions	8
1.2 Adjusting the angle of the control panel	10
1.2.1 To adjust the angle of the control panel	10
1.3 Screens in Enlarge Display mode	12
1.3.1 Displaying screens in Enlarge Display mode	12
1.4 Touch panel	14
1.4.1 Touch panel operation	14
1.4.2 Icons that appear in the screen	14
1.4.3 Paper type icons	15
1.4.4 Paper supply icons	16
1.5 Feeding the original	17
1.5.1 Loading the original into the ADF	17
1.5.2 Placing the original on the original glass	18
1.6 Specifying original settings	19
1.6.1 Copying originals of mixed sizes (\	19
1.6.2 Loading folded originals (\	21
1.6.3 Selecting the original orientation (Original Direction settings)	23
1.6.4 Selecting the position of the binding margin (Original Binding Position/Binding Position settings)	25
2 Using copy functions	29
2.1 General copy operation	29
2.2 Selecting the Paper settings	31
2.2.1 Automatically selecting the paper size (\	31
2.2.2 Manually selecting the desired paper size	33
2.3 Specifying a Zoom setting	34
2.3.1 Selecting a zoom ratio	35
2.4 Selecting original and copy settings	36
2.4.1 Selecting single-sided or double-sided copies	37
2.5 Selecting a combined copy setting	39
2.6 Selecting Finishing settings	41
2.6.1 Selecting the finishing method	42
2.6.2 Selecting Staple/Punch settings	43
2.6.3 Selecting a folding or binding setting	45
2.7 Selecting not to rotate the image	47
2.8 Selecting the quality of the original	48
2.9 Selecting the density settings	50
2.9.1 Adjusting the print density (Density settings)	50
2.9.2 Adjusting the background density (Background Removal settings)	51
2.10 Selecting the Paper settings	53
2.10.1 Selecting a Paper Type setting for the bypass tray	53
2.10.2 Selecting a Paper Size setting for the bypass tray	56
2.11 Scanning the next original to be copied while a copy job is being printed (next job reservation)	59
2.12 Pausing scanning/printing	60
2.13 Printing a proof to check the settings (Proof Copy)	61
3 Using fax/scanning functions	64
3.1 General fax/scan operation	64
3.2 Specifying a destination	66
3.2.1 Selecting a destination from the address book	67
3.2.2 Selecting a destination from the job log	69
3.2.3 Selecting a destination with an LDAP search	71
3.2.4 Directly typing in the number	74
3.3 Specifying scanning settings (Scan Settings)	76
3.3.1 Simplex/Duplex	76
3.3.2 Original Type	78
3.3.3 Resolution	80
3.3.4 Density	82
3.3.5 File Type	84
3.3.6 Background Removal	85
3.3.7 Scan Size	87
3.3.8 Original Settings	88
3.4 Using a program	91
3.5 Checking the destinations	93
4 Logging on and logging off	96
4.1 When a logon screen appears	96
4.1.1 When the screen to enter the user name appears	96