Konica Minolta bizhub 958 bizhub 958/808 Quick Start Guide - Page 86
Preparation flow, Checking the cable connection, Opening original data
View all Konica Minolta bizhub 958 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 86 highlights
Basic Settings and Operations Chapter 3 3.1 Print function 3 Preparation flow The following describes a preparation flow to print data. For details, refer to the relevant page. This preparation is not required the second time or subsequent times. 1 Checking the cable connection (Administrator) % Check that this machine is correctly connected to the network cable. For details, refer to page 3-9. 2 Checking network settings of this machine (Administrator) % Check the network settings of this machine. For details, refer to page 3-10. The network can be used with the default settings unless otherwise requested. 3 Installing the printer driver % Install the printer driver on the computer. For details, refer to page 3-11. 4 Adding and configuring a printer driver % Set up your computer so that data can be printed using the installed printer driver. For details, refer to page 3-14. Operation flow The following describes a flow to print data from your computer. For details, refer to page 3-16. 1 Opening original data % Open the data you want to print using the application software. 2 Configuring the printer driver for printing % Select a printer driver, and change the setting if necessary before printing. Checking the cable connection Check that a LAN cable is connected to the LAN port of this machine and the green LED is on. bizhub 958/808/758 3-9