Konica Minolta bizhub PRESS 1250 Watkiss PowerSquare Sheet Feeder User Manual - Page 20
High Pile manual loading tray, Manual loading tray
View all Konica Minolta bizhub PRESS 1250 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
5.5 High Pile manual loading tray The PSF is provided with a Manual loading tray as shown below Manual loading tray Note: - The blower air level must be adjusted to 0 in the "Preference Menu" see chapter "7.6 PSF Preference Menu", page 48 1) Enter High Pile paper format at UI. 2) Open High Pile door. 3) Install the loading tray (A) inside the machine against the stops by positioning the pins from the frame in the holes on the rear of the loading tray as shown below 4) Press simultaneously the two green buttons (G). At this time, the air table connects and the movable stop (M) moves in order to position the paper pile. G M F D A A 5) Depress both green buttons (G) when the moving of the movable stop (M) has stopped. Both buttons (G) switch on to inform operator that the moving of the movable stop (M) is over. 6) Manually move the paper pile against the fixed stop (F) and the movable stop (M). 7) Close the door. 8) Press the button on the door handle (D). The support raises and the High Pile paper stops go in position according to the paper format. 9) The PSF is ready to feed. Operator Manual Initial issue: 05/11 Page 9 - 20 Latest revision: 03/13