Konica Minolta bizhub PRESS C7000/C7000P IC-306 Procedure to upgrade to Versio - Page 1

Upgrading the Fiery PRO80 80C-KM or Fiery PRO80 70-60C-KM Color Server to System Version 2.0 Overview This document describes how to upgrade the Fiery PRO80 80C-KM or Fiery PRO80 70-60C-KM Color Server to system software version 2.0. Notify the network administrator at the customer site that some archived jobs may no longer print after you install version 2.0 system software. NOTE: The term "Fiery PRO80" is used in this document to refer to the Fiery PRO80 80C-KM or Fiery PRO80 70-60C-KM Color Server. Contents of this kit In addition to this document, this kit contains: • Two 1GB DIMMs - for upgrading the memory from 2GB to 4GB. • BIOS Upgrade CD - for upgrading the BIOS from version 1.31 to version 1.55. • One-time use dongle - for upgrading the BIOS from version 1.31 to version1.55. • Media Package - System Software Package - System Software version 2.0 for installation on the Fiery PRO80 following the BIOS upgrade procedure. - User Software Package - User Software for installation on client computers; User documentation CD; printed release notes; additional documentation. Procedures The list below is a summary; see the complete procedures in the following pages. To upgrade the Fiery PRO80, perform the following procedures in the order shown below. 1. Install the additional DIMMs (see page 2). 2. Upgrade the BIOS (see page 3). 3. Install system software (see page 4). Installing system software deletes everything on the HDD. Coordinate with the network administrator at the customer site before installing system software. 4. Verify the product upgrade (see page 6). Copyright 2011 © Electronics for Imaging, Inc. Part Number: 45097576 February 17, 2011 *45097576*