Konica Minolta magicolor 1650EN magicolor 1650EN Reference Guide - Page 180

Installing the Driver When the Operating Systems of the Server and Client Use a Different Number of Bits (With Windows Server 2008) When Windows Server 2008 is running on the print server or when the operating systems running on the print server and client computer use a different number of bits, the additional driver may not be installed correctly on the print server. This can be corrected by specifying the setup information file (ntprint.inf) for the operating system with the different number of bits while installing the additional driver on the print server. The following server and client operating systems can be used together. Server Windows Server 2008 (32 bits) Windows Server 2008 (64 bits) Windows Vista (32 bits) Windows Vista (64 bits) Client Computer Windows Vista (64 bits) Windows Vista (32 bits) Windows Server 2008 (64 bits) Windows Server 2008 (32 bits) The procedure for specifying the setup information file for a computer other than the print server and installing the additional driver is described below. " From the print server, map the system drive of the client computer as a network drive. The drive to be mapped must first be specified as a shared drive. Installing the Additional Driver As an example, the following procedure describes the operations performed when Windows Server 2008 (32 bits) is running on the print server and Windows Vista (64 bits) is running on the client computer. 1 Specify the client computer (64 bits) drive installed with the operating sys- tem (normally, drive C) as a shared drive. " This setting is available for only PS driver. Network Printing 6-35