Konica Minolta magicolor 1690MF magicolor 1690MF Reference Guide - Page 224

Setting Up the Machine Web Page Setting up the machine web page to run on your network involves two basic steps: „ Determining the name or address of your machine „ Setting up the "no proxy" preferences in your browser software Determining the Machine Name The machine web page can be accessed in two ways: „ Through the assigned name of the machine-This name comes from the IP host table (the filename is hosts) on the computer system and is usually assigned by the system administrator (for example, magicolor 1690MF). It may be more convenient for you to use the machine name than the IP address. Location of the Host Table on the PC z Windows 7/Vista/Server 2008/Server 2003/XP \windows\system32\drivers\etc\hosts z Windows 2000 \winnt\system32\drivers\etc\hosts „ Through the machine's IP address-The IP address of your machine is a unique number and, therefore, may be the preferred identification to enter, especially if you have more machine active in your network. The machine's IP address is listed on the configuration page. Setting Up Your Browser Software Since your machine resides on your intranet and is not accessible beyond the firewall of your network, you must set up the proper "preferences" in your browser software. Your machine name or IP address must be added to the "no proxy" list in the preferences dialog box of the browser. " You need to do this procedure only once. The sample screens below may be different from yours depending on software versions and operating systems in use. " Our examples represent the IP address of the machine with xxx.xxx.xxx.xxx. Always enter your machine's IP address without leading zeros. For example, 192.168.001.002 should be entered as 192.168.1.2. Setting Up the Machine Web Page 7-3