Konica Minolta pagepro 5650EN pagepro 4650EN/5650EN Reference Guide - Page 338
Interface Menu - Ethernet - Tcp, Ip - Ip Address Filter - Access, Refuse
View all Konica Minolta pagepro 5650EN manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 338 highlights
Item Description Access Refuse If Enable is selected, the range of IP addresses refused Address access to the printer can be specified. A maximum of five ranges of refused IP addresses can be specified. If Disable is selected, the refused access setting is disabled. Choices: Enable, Disable Default: Disable Configuration Menu Equivalent: INTERFACE MENU - ETHERNET - TCP/ IP - IP ADDRESS FILTER - ACCESS REFUSE Range of IP address refused access Specify the range of IP addresses refused access to the printer. Type the IP address at the beginning of the range into the box on the left, and the IP address at the end of the range into the box on the right. Range: 0-255 for each xxx triplet Default: 0.0.0.0 " To specify a single IP address, type the same IP address into both the box for the starting IP address and for the ending IP address, or type "0.0.0.0" into the box for either the starting IP address or the ending IP address. " If the starting IP address is larger than the ending IP address, the setting is not applied. Apply button Applies the configuration settings in this page. Clear button Resets all configuration settings to previous values. * Always enter these addresses without leading zeros. For example, 131.011.010.001 should be entered as 131.11.10.1. 320 Configuring the Printer