Kyocera ECOSYS FS-1320D PRESCRIBE Commands Technical Reference Manual - Rev. 4 - Page 105
Interface-independent Parameters, Table 6.2.
View all Kyocera ECOSYS FS-1320D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 105 highlights
Interface-independent Parameters Table 6.2. Interface-independent Parameters (Sheet 1 of 7) Environment Parameter Value Factory setting Downloadable PCL font B0 compression 0: Off 1: On 0 (countries excluding Asia) or 1 (Asia) Message language B7 selection at power-on 0: Automatically enters message language 1 selection menu at the initial power-on. After a language is selected, B7=1 is set automatically. 1: Does not automatically enter message language selection menu at power-on. Default pattern B8 0: 300 dpi 0 resolution (PAT, FPAT, GPAT) 1: 600 dpi 3: 1200 dpi Minimum memory B9 allocation for resource protection/(in duplex mode) 0: 12 MB or more (16 MB or more) 1: 10 MB (14 MB) 2: 8 MB (12 MB) 3: 6 MB (10 MB) 0 or 1 4: 4 MB (8 MB) 5: 2 MB (6 MB) Copy count C0 Number of copies to print:1-999 1 KPDL font range C9 0: KPDL fonts only 0 1: KPDL and PCL fonts Serial line control D0 0: XON is sent every 5 seconds during the 0 printing system is ready or waiting. Error is ignored. 1: XON is sent every 5 seconds during the printing system is ready or waiting. Error is valid. 10: XON is not sent. Error is ignored. 11: XON is not sent. Error is valid. A4 full page bleeda D1 0: Off 0 1: On Audio alarm D2 0: Off 1 1: On Paper size error D3 0: Not notified 0 1: Notified 2: Complies with MS certification Print density D4 Number from 1 (Light) to 5 (Dark) 3 Service status page D5 0: Not printed 1 1: Printed Paper jam retry timing D6 0: End of page 0 1: Fuser sensor activated 2: Fuser sensor deactivated 3: Page ejection 4: Same as 0; non-engine-dependent Host buffer size H0 0 to 99 in units of 10MB (0 to 990MB) 0 Serial interface baud H1 rate 3: 300 bps (not valid for some models) 96 6: 600 bps (not valid for some models) 12: 1200 bps 24: 2400 bps 48: 4800 bps 96: 9600 bps 19: 19200 bps 38: 38400 bps 57: 57600 bps 11: 115200 bps Serial interface data bits H2 7 or 8 8 Serial interface stop bits H3 1 or 2 1 Serial interface parity H4 0: None 0 1: Odd 2: Even 3: Ignore Serial interface protocol H5 0: Combination of 1 and 3 below 0 1: DTR, positive true 2: DTR, negative true 3: XON/XOFF 6-5