Kyocera ECOSYS M2040dn ECOSYS M2135dn/M2635dw/M2040dn/M2040dw Operation Guide - Page 66
Network Setup, Configuring the Wired Network
View all Kyocera ECOSYS M2040dn manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 66 highlights
Installing and Setting up the Machine > Network Setup NOTE Select the [▲] or [▼] key to enter a number. Select the [◄] or [►] key to move the position being entered, which is shown highlighted. Network Setup Configuring the Wired Network The machine is equipped with network interface, which is compatible with network protocols such as TCP/IP (IPv4), TCP/IP (IPv6), NetBEUI, and IPSec. It enables network printing on the Windows, Macintosh, UNIX and other platforms. Set up TCP/IP (IPv4) to connect to the Windows network. Be sure to connect the network cable before configuring the settings. Connecting LAN Cable (page 2-8) For other network settings, refer to the following: Network Setting (page 8-7) NOTE If user login administration is enabled, you can only change the settings by logging in with administrator privileges. If user login administration is disabled, the user authentication screen appears. Enter a login user name and password, and select [Login]. The factory default login user name and login password are set as shown below. Model Name Login User Name Login Password ECOSYS M2135dn/ECOSYS M2635dn/ 3500 ECOSYS M2635dw 3500 ECOSYS M2040dn/ECOSYS M2540dn/ 4000 ECOSYS M2540dw 4000 IPv4 setting 1 Display the screen. [System Menu/Counter] key key > [System/Network] > [OK] key key > [Network Setting] > [OK] key key > [Wired Netwk. Set] > [OK] key key > [TCP/IP Settings] > [OK] key key > [IPv4 Setting] > [OK] key 2 Configure the settings. When setting the static IP address 1 key > [DHCP] > [OK] key key > [Off] > [OK] key 2 key > [IP Address] > [OK] key 2-18