Kyocera ECOSYS M3540idn ECOSYS Model Printer Driver User Guide Rev 16.18.2013. - Page 12
Custom Installing Utilities Only - reviews
View all Kyocera ECOSYS M3540idn manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
Installation 8 If you want to remove a product from the Products to Install list, select it and click Remove at the bottom of the list box. To remove all products, click Remove all. 9 You can select Use host name as port name to use a host name for the Standard TCP/IP port. (Not available with a USB connection.) 10 For each printing device and driver combination in the Products to Install list, you can click the Edit icon to open a dialog box with installation options for the drivers. Make your selections from the available options. 11 Review your settings. At least one printing system, driver, or a utility, must be selected to enable the Install button. If your settings are correct, click Install. 12 During the installation, you can expand or collapse the installation detail by clicking the arrow. When the installation completes successfully, on the Finished page you can select from the following options. These options only appear after a printer driver installation. Print a test page Select this option to test the connection and operation of the printing system. If the installation is successful, the Windows Printer Test Page, containing your computer name and information on your printer driver and port settings, prints at the newly installed printing system. Device Settings Select the Device Settings check box to open Device Settings where you can choose installed options for your printing system. (The Device Settings check box appears only in Windows XP with a network connection.) Enable event notification Select the check box to enable event notification in the Status Monitor Notification dialog box. You can set up sound and speech notifications for printing system events. Show Quick Print tab The Quick Print tab lets you define basic print options into group profiles that can be accessed easily. The Show Quick Print tab option also appears in Device Settings > Administrator > General. 13 To exit the installer application click Finish. A message may appear if there is a software installation failure. After clicking Finish, retry the installation. If the same message appears again, contact your system administrator. The installation of the printing system is now complete. If prompted, restart your computer. Custom Installing Utilities Only This section describes the custom installation of utilities without printing systems or drivers. 1 Ensure that your printing device and computer are turned on and connected by USB or network cable. 1-5 User Guide