Kyocera ECOSYS M3655idn M3655idn/M3660idn/M3145idn/M3645idn Fax Operation Guid - Page 135

Managing Jobs > Printing Administrative Reports (Result Report Setting) Printing Administrative Reports (Result Report Setting) You can print various administrative reports to check the results of fax transmission or the status of the functional setup. Send Result Reports Each time you send a fax, you can print a report to confirm whether the fax was sent successfully. You can also print the transmitted image in the send result report. 1 Display the screen. [System Menu/Counter] key > [Report] > [Result Report Setting] > [Send Result Report] > [FAX] 2 Configure the function. 1 Select [Off] (not to print), [On] (to print), [Error Only], or [Specify Each Job]. NOTE When [Specify Each Job] is selected, it is possible to set a send result report when transmitting. FAX TX Report (page 3-23) 2 If you selected [On], [Error Only] or [Specify Each Job], specify whether the transmitted image is to be attached by selecting [Off] (do not print transmitted image), [Partial Image] (print part of the transmitted image at full size), or [Full Image] (print the entire transmitted image at reduced size). With transmitted image Without transmitted Send Result Report Completed Send Result Report Completed Attached image when a network fax is sent Select whether the image to be attached to an Activity Report will be [Body] or [Cover Page], when using network fax. 1 Display the screen. [System Menu/Counter] key > [Report] > [Result Report Setting] > [Send Result Report] > [Attach Image of Network FAX] 2 Configure the settings. Select [Body] or [Cover Page]. 7-4