Kyocera ECOSYS M3655idn M3645idn/M3655idn/M3660idn Fax Operation Guide - Page 102
Remote Switch Function, The connected telephone set makes a ringing tone.
View all Kyocera ECOSYS M3655idn manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 102 highlights
Using Convenient Fax Functions > Using a Connected Telephone Remote Switch Function You can start fax reception by operation from the connected telephone set. This function is convenient for using this machine and a telephone set (commercially available product) in combination installed at places distant from each other. NOTE In order to use remote switch, it is necessary to connect the tone signal-sending telephone set (commercially available product) to the machine. However, even if it is a tone signalsending telephone set, this function may not be used satisfactorily depending on the type of telephone set. For details, contact our agent or the store where you purchased this machine. The remote switch dial is set to 55 at the factory. The remote switch dial number can be changed. Remote SW Dial (page 8-9) Using the Remote Switch Dial To start fax reception by operation from the connected telephone set, use the following operation. 1 The connected telephone set makes a ringing tone. Lift the handset of the telephone. NOTE You can change the number of times the ringing tone rings. FAX (page 8-7) 2 Press the remote switch dial number (2 digits). When you hear the fax tone from the handset, enter the two-digit remote switch dial number using the dial button on the telephone set. The telephone line switches to the machine, and reception starts. 5-36