Kyocera FS 9520DN IB-23 User's Manual in PDF Format - Page 102
Resetting to Factory Defaults
View all Kyocera FS 9520DN manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 102 highlights
Troubleshooting 3/4 ページ End of Job String field. To access the End of Job String in the browser: 1. Connect to the IB-23 home page, e.g. http://192.168.40.17 2. Select Printer Control and enter the following command in the End of Job String: \x04 Resetting to Factory Defaults How can I reset all IB-23 settings back to their factory default values? With a browser: 1. Access the IB-23 webpage. 2. On the Basic tab, click Reset. Click Set All Network settings to Factory Default. With the jumper arrangement: If you are unable to communicate with the IB-23, it may be reset to factory defaults by changing the onboard jumper arrangement. Proceed as follows: 1. Turn printer power off. 2. Remove the IB-23 from the printer. 3. Locate the jumper terminals on the board. Note the normal position of the jumper in reference to the terminals. file://F:\USERMAN\EXPORT\Option\IB-23\P6 English\troubleshoot.... 2006/05/26