Kyocera FS 9520DN IB-23 User's Manual in PDF Format - Page 8
IP Address Configuration
View all Kyocera FS 9520DN manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
IP Address Configuration 1/9 ページ IP Address Configuration This section describes several methods for configuring the IP address information for the IB-23. The method you use will depend on your particular network configuration as well as your personal preferences. For example, if your network includes a DHCP server, then you will likely use DHCP for setting the IB-23 IP addresses. Following are the possible methods for configuring the IP addresses: Using DHCP Using WINS Using Quick Setup Using RARP or BOOTP Using ARP Using the Printer's Operator Panel After following the procedures in this section to configure the IP address, it is recommended to verify the IP address settings: Verifying the IP Address Settings Using DHCP DHCP (Dynamic Host Configuration Protocol) provides a mechanism for delivering IP configuration parameters, including IP address, subnet mask, etc. to devices on an IP network. DHCP alleviates the administrative burden of managing individual IP addresses. A DHCP server processes IB-23 DHCP discovery broadcasts and returns an IP address to the IB-23. The DHCP server may be set up to grant an IP address for a limited time (a temporary lease) or for an unlimited (an unlimited lease), or it may be configured with a permanent address reservation for the IB-23. ! Note: In a non-WINS environment (See WINS Configuration, below.), it is highly recommended to set up the DHCP server to grant the IB-23 an unlimited lease or permanent address reservation. Unlimited Lease or Address Reservation in Windows NT 4.0 and Windows 2000 In Windows NT 4.0 and 2000, lease duration is set for a particular scope, or group of addresses. Thus, lease duration should be set to Unlimited for the scope to which the IB-23 belongs. If this is not desired, then the IB-23 should be defined as a Reserved Client. Use the following procedure in Windows DHCP Manager to add a reserved client. 1. Select the scope that the IB-23 will belong to, then select Add Reservations from the Scope menu. The Add Reserved Clients window will open. Figure 1. Adding a Reserved Client file://F:\USERMAN\EXPORT\Option\IB-23\P6 English\tcpip_setting.h... 2006/05/26