Kyocera KM-C4035E PRESCRIBE Commands Command Reference Manual Rev 4.8 - Page 309
Simg
View all Kyocera KM-C4035E manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 309 highlights
SIMG SIMG - Set IMaGe model Format SIMG operation-mode; Parameter operation-mode: Source image 1 = Transparent 2 = Opaque 3 = Transparent 4 = Transparent 5 = Opaque 6 = Opaque Pattern image - - Transparent Opaque Transparent Opaque Function The SIMG command sets the mode for controlling the transparency and opaqueness of an image and the current pattern when they are overlaid on each other. In the table above, the source image can be a rectangular area, characters, or a raster graphics image preceded by an SIMG command. The fill patterns and gray shade rendered with the PAT (pattern), FPAT (fill pattern), and GPAT (gray pattern) commands can be used for pattern images. With operation modes 1 and 2, the SIMG command takes care of the source image's transparency only. The default operation mode is 1. The white pixels of the source image do not overlay on the destination. For example, you cannot pattern a character. With operation mode 2, the SIMG command applies the white pixels of the source image onto the destination directly. 299