Kyocera KM-C4035E PRESCRIBE Commands Command Reference Manual Rev 4.8 - Page 376
XBCP 1, specify narrowest element width
View all Kyocera KM-C4035E manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 376 highlights
PRESCRIBE Command Reference XBCP 1 - specify narrowest element width Format XBCP 1, element-width; Parameter element-width: narrowest bar and space width: More than or equal to 1 dot. If less than 1 dot, truncated to 1 dot. Default is 3 dots. Function PDF417 supports 8 different bar and space widths. The each width is a multiple of 1 to 8 times of the narrowest element width. The XBCP command set to mode 1 specifies the narrowest element width (narrowest bar width) in the current unit as designated by a UNIT command. In the following example, the element width is set to .02 inches as the default unit is inches. Minimum width allowed by the printing system is 1 dot. Minimum readable width is probably higher. Minimum width meeting AIM recommendation for open systems is 3 dots. After the first example has been printed, the printing system moves cursor 1 inch down to print another example in which the minimum element width is reverted to its default (3 dots). File !R! RES; MZP 0, 0; XBCP 1, .02; XBAR;Min. element width is .02 inches;ENDB; MZP 0, 1; XBCP 0; XBAR;Min. element width is reset (to 3 dots);ENDB; EXIT; Printout Minimum element width is 0.02 inch. Default minimum element width (3 dots) 366