Kyocera TASKalfa 4012i 3212i/4012i KX Driver Operation Guide - Page 13
Show Quick Print tab, Status Monitor Notification
View all Kyocera TASKalfa 4012i manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
Installation Printer Driver 9 You can select Use host name as port name to use a host name for the Standard TCP/IP port. (Not available with a USB connection.) 10 For each printing device and driver combination in the Products to Install list, you can click Edit to open a dialog box with installation options for the drivers. Make your selections from the available options. 11 Review your settings. At least one printing system, driver, or utility must be selected to enable the Install button. If your settings are correct, click Install. 12 A Data Collection dialog box appears before installation continues. Select Yes to help improve the software, or No to not participate in the data collection process. Click OK. The installation continues. 13 When the installation completes successfully, on the Finished page you can select from the following options. These options only appear after a printer driver installation. Print a test page Select the check box to test the connection and operation of the printing system. If the installation is successful, the Windows Printer Test Page, containing your computer name and information on your printer driver and port settings, prints at the newly installed printing system. Set Duplex as default After installation is successful, depending on your country, Set Duplex as default appears and is selected on the Finished page. The driver is set to duplex mode by default. You can make exceptions to the default later by selecting options in the driver Quick Print or Basic tabs. Enable event notification Select the check box to enable event notification in the Status Monitor Notification dialog box. The Status Monitor Notification dialog box appears after clicking Status Monitor on the Advanced tab. Show Quick Print tab With Quick Print, you can define basic print options into group profiles that can be accessed easily. The Show Quick Print tab option also appears in Device Settings > Administrator > General. Click the plus sign to expand the list of options: The Set Quick Print tab as default option makes the Quick Print tab the first tab you see when you open the driver. The Set Basic tab as default option makes the Basic tab the first tab you see when you open the driver. The Hide other tabs option makes the Quick Print tab the only tab in the driver. 14 To exit the installer application, click Finish. A message may appear if there is a software installation failure. After clicking Finish, fix any issues and retry the installation. If the same message appears again, contact your system administrator. The installation of the printing system is now complete. If prompted, restart your computer. 1-6