Kyocera TASKalfa 6053ci 6053ci Series Operation Guide - Page 223

Operation on the Machine > Loading Paper in the Multipurpose Tray Loading Paper in the Multipurpose Tray For details of the supported paper sizes, refer to the following: Choosing the Appropriate Paper (page 11-14) For the paper type setting, refer to the following: Media Type Setting (page 8-15) Be sure to use the multipurpose tray when you print on any special paper. IMPORTANT • If you are using a paper weight of 106 g/m2 or more, set the media type to Thick and set the weight of the paper you are using. • Remove each transparency from the inner tray as it is printed. Leaving transparencies in the inner tray may cause a paper jam. The capacity of the multipurpose tray is as follows. • A4 or smaller plain paper (80 g/m2), recycled paper or color paper: 150 sheets • B4 or larger plain paper (80 g/m2), recycled paper or color paper: 50 sheets • Thick paper (209 g/m2): 10 sheets • Thick paper (157 g/m2): 50 sheets • Thick paper (104.7 g/m2): 50 sheets • Hagaki (Cardstock): 30 sheets • Envelope DL, Envelope C5, Envelope #10, Envelope #9, Envelope #6 3/4, Envelope Monarch, Kakugata 2, Youkei 4, Youkei 2, Younaga 3, Nagagata 3, Nagagata 4: 10 sheets • OHP film: 10 sheet • Coated: 10 sheets • Banner paper: 488.1 mm (19.22") to a maximum of 1,220 mm (48.03"): 1 sheet (manual feed), 10 sheets (when optional banner tray is attached) • Index tab dividers: 15 sheets NOTE • When you load custom size paper, enter the paper size by referring to the following: Original / Paper Settings (page 8-11) • When you use special paper such as transparencies or thick paper, select the media type by referring to the following: MP Tray Setting (page 8-8) • Paper size can be automatically detected and selected, refer to the following: Paper Selection (page 6-19) MP Tray Setting (page 8-8) 1 Open the multipurpose tray. 5-7