Kyocera TASKalfa Pro 15000c Pro 15000c Command Center RX User Guide - Page 28
Original Document, Auto Detect Original Size, Custom Original Size
View all Kyocera TASKalfa Pro 15000c manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
Device Settings 4. When you select a paper brand registered from the Fiery controller, you can configure the settings such as main unit paper feed speed and print position setting. The configured settings is reflected when printing. For details, refer to Cassette Settings on page 20. Click Submit button. 5. Click Back button. Original Document This section explains how to configure the original. Auto Detect Original Size 1. Click Original Document under Device Settings on the navigation menu. The Original Document page opens. 2. You can configure the following settings. System of Units Select Metric or Inch as measurement of original document for auto detect. If you select Metric, A6/Hagaki, Folio, and 11 x 15" are displayed. If you select Inch, select an original size (Legal, OfficioII or 216 x 340 mm) from the drop-down list. Default Original Size (Platen) Select the default size of original placed on the platen glass. When selecting Off, a confirming screen appears before scanning. Displayed when System of Units is set to Metric A6/Hagaki Select A6 or Hagaki (postcard) as a original size for auto detect. When you select Hagaki (postcard), only an original placed on a platen can be detected. Folio Select On when you want to detect the Folio-size document automatically. 11 x 15" Select On when you want to detect the 11 x 15"-size document automatically. 3. You can select A6 or Hagaki for A6/Hagaki and On (auto detection) or Off for Folio and 11 x 15", according to the machine type. 4. After confirming the settings, click Submit button. Custom Original Size 1. Click Original Document under Device Settings on the navigation menu. The Original Document page opens. 2. Select On or Off for each Custom Original (1 to 4). When you want to change the settings, enter the length (X) and width (Y) of the Custom Paper. Note: You can enter the length of Custom Paper without selecting On or Off according to the machine. 24 Embedded Web Server