LG 24UD58-B Owners Manual - Page 22

ENEGNLGISH 22 User Settings -General 1 To view the OSD menu, press the joystick button at the bottom of the monitor and then enter the Menu. 2 Go to General by moving the joystick. 3 Configure the options following the instructions that ap- pear in the bottom right corner. 4 To return to the upper menu or set other menu items, move the joystick to ◄ or pressing ( / OK) it. 5 If you want to exit the OSD menu, move the joystick to ◄ until you exit. Each option is described below. Menu > General Language SMART ENERGY SAVING Power LED Automatic Standby DisplayPort 1.2 Description Sets the menu screen to the desired language. High Saves energy using the high-efficiency SMART Energy Saving feature. Low Saves energy using the low-efficiency SMART Energy Saving feature. Off Disables the SMART Energy Saving feature. Turns the power LED on the front of the monitor on or off. On The power LED turns on automatically. Off The power LED turns off. Feature that automatically turns off the monitor when there is no movement on the screen for a period of time. You can set a timer for the auto-off function. (Off, 4 H, 6 H, and 8 H) Enables or disables DisplayPort 1.2. Note yy Be sure to configure this option according to the DisplayPort version supported by your graphics card. Set this option to Disable if your graphics card does not support DisplayPort 1.2. OSD Lock This feature disables the configuration and adjustment of menus. On Enables OSD Lock. Off Disables OSD Lock. NOTE yy All features are disabled except Brightness, Contrast, Volume, Input, OSD Lock in Settings, and the Exit button. NOTE yy Saving Data depends on the Panel. So, those values should be different from each panel and panel vendor. If option of SMART ENERGY SAVING is High or Low, monitor luminance become higher or lower depend on source.