LG 29FX4BL-LG Owner's Manual - Page 8

Basic TV operation Memorizing Channels This is the function to memorize all the active channels in your area before you can use the TV. There are two ways of memorizing channels. You can use either. One is called AUTO PROGRAM and the other is called MANUAL PROGRAM. In AUTO PROGRAM the TV will memorize the channels in ascending order. If there are additional channels you want to add or delete, you can manually add or delete those channels. Memorizing the Channels by AUTO PROGRAM AUTO PROGRAM searches and memorizes all the active channels in your area then you can select the desired channel with the D / E buttons. Using the A.PROG button You can conveniently perform AUTO PROGRAM using the A.PROG button on the remote control. 1. Press the A.PROG button. 2. Press the G or A.PROG button. The AUTO PROGRAM starts now. ++Auto+program OToOOstart OAutoOprogramOOOOOOOOTVO19 O5% If you want to stop auto programming, press the ENTER (A) button. Only the channels searched up to that time are memorized. Notes : • If the programmed signal has poor quality, memorize again in the Auto program. • AUTO PROGRAM stores all receivable channels regardless of receiving signal (RF, Cable). • If channels of general wireless TV and cable TV are duplicated, press the number buttons (0 ~ 9) to change as . Channels of general wireless TV Channels of Cable TV Using the MENU button 1. Press the MENU button and then use D / E button to select the channel menu. 2. Press the G and then D/ E button to select Auto program. 3. Press the G button to enter the Auto program mode. 4. The AUTO PROGRAM starts now. StopÅ Channel CH. Auto+program { Manual program { Favorite+channel++ { Auto+demo+ ++++{ Move++Next+{+Exit} 8