LG 42PX3DBV Owners Manual - Page 14
not included
View all LG 42PX3DBV manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
Ins_llation NOTE: All cables shown are not included with the T¢ To avoid picture noise (interference)_ _eave an adequate distance between the VCR and TV U_ the ]SM Method (on the Option menu) feature to avoid having a fixed image remain on the screen for a tong period of time. Typically a frozen still picture from a VCR. [f the 4:3 picture format is used; the fixed images on the sides of the screen may remain visib[e on the screen. Connection Option 1 Set VCR output switch to 3 or 4 and then tune TV to the same c_anne[ number. Connection Option 2 1. Connect the audio and video cables from the VCR's output iacks to the TV input jacks, as shown in the figure. When connecting the TV to a VCR, match the jack corers (Video = yellow, Audio Left = white, and Audio Right = red). If you connect the S-VIDEO output from a VCR to the S-V[DEO input, the picture quality is improved; compa#ed to connecting the Video }nput. 2. insert a video tape into the VCR and press [] PLAY on the VCR. (Refer to the VCR owner's manual,) 3 Select the input source by using the TVTVIDEO button on the remote control (ff connected to A!V iNPUT 1, set_ Video 1 input source) [] VCR Do not connect to both Video and S-Video at the same t_me, After subscribing to a _b]e TV _rvice from a local provi_r and installing a converter, you can watch cable TV programming. The TV cannot display TV programming unless a TV tuner _vice or ceb[e TV converter box is connected to the TV. For farther information regarding cable TV service, contact your local cable TV service provider(s). Connection Option 1 1, Sele_ 3 or 4 w_th channel switch on the cabte biox_ 2_ Tune the TV channel to the same selected output channel on cable box & Select channels at the cable box or with the cable box remote control Connection Option 2 1, Connect the audio and video cables from the Cable Box's output iacks to the TV input jacks, as shown in the figure. When connecting the TV to a Cable Box, match the jack corers (Video =, yellow, Audio Left = white, and Audio Right = red). 2. _[ect the input source by using the TViVIDEO button on the remote control (ff connected to A/V INPUT 1, select Video 1 input source) 3. Select your desired channel with the remote control for cable box, [] Cable Box 14 Plasma TV