LG 49SL5B Owners Manual - Page 83
Tile V Size Command: d h
View all LG 49SL5B manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 83 highlights
ENGLISH 42. Tile Mode Check (Command: d z) To check Tile Mode status. Transmission [d][z][ ][Set ID][ ][Data][Cr] Data FF: Check Tile Mode status. ** It may not be supported depending on the model. Acknowledgement [z][ ][Set ID][ ][OK/NG][Data1][Data2][Data3][x] Data1 Data2 Data3 00: Tile Mode Off 01: Tile Mode On 00 to 0F: Tile Row 00 to 0F: Tile Column TO CONTROL MULTIPLE PRODUCTS 83 45. Tile V Position (Command: d f) To adjust the Tile Vertical position. * This function is available only when the Natural option of the Tile Mode is set to Off while the Tile Mode set to On. Transmission [d][f ][ ][Set ID][ ][Data][Cr] Data 0 to 32: 0 (Bottom) to 50 (Top) * Bottom/Top values depend on Tile Vertical size. ** It may not be supported depending on the model. Acknowledgement [f ][ ][Set ID][ ][OK/NG][Data][x] 43. Tile ID (Command: d i) To set Tile ID. Transmission [d][i][ ][Set ID][ ][Data][Cr] Data 01 to E1: Tile ID 01 to 225** FF: Check Tile ID ** Data could not be set over (Tile Column) x (Tile Row). ** It may not be supported depending on the model. Acknowledgement [i][ ][Set ID][ ][OK/NG][Data][x] *NG will be return if data is over (Tile Column) x (Tile Row), except 0xFF. 44. Tile H Position (Command: d e) To adjust the Tile Horizontal position. * This function is available only when the Natural option of the Tile Mode is set to Off while the Tile Mode set to On. Transmission [d][e][ ][Set ID][ ][Data][Cr] Data 00 to 32: -50 (Left) to 0 (Right) *Left/Right values depend on Tile H size. ** It may not be supported depending on the model. Acknowledgement [e][ ][Set ID][ ][OK/NG][Data][x] 46. Tile H Size (Command: d g) To adjust the Tile Horizontal Size. *Set Tile H Position to 0x32 before setting Tile H Size. * This function is available only when the Natural option of the Tile Mode is set to Off while the Tile Mode set to On. Transmission [d][g][ ][Set ID][ ][Data][Cr] Data 00 to 32: 0 to 50 ** It may not be supported depending on the model. Acknowledgement [g][ ][Set ID][ ][OK/NG][Data][x] 47. Tile V Size (Command: d h) To adjust the Tile Vertical size. *Set Tile V Position to 0x00 before setting Tile V Size. * This function is available only when the Natural option of the Tile Mode is set to Off while the Tile Mode set to On. Transmission [d][h][ ][Set ID][ ][Data][Cr] Data 00 to 32: 0 to 50 ** It may not be supported depending on the model. Acknowledgement [h][ ][Set ID][ ][OK/NG][Data][x]