LG 49UH5C Owners Manual - Page 82
Transmission/Reception Protocol
![]() |
View all LG 49UH5C manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 82 highlights
ENGLISH_index 44 Transmission/Reception Protocol Transmission [Command1][Command2][ ][Set ID][ ][Data][Cr] * [Command1]: Identifies between the factory setting and the user setting modes. * [Command2]: C ontrols monitor sets. * [Set ID]: U sed for selecting a set you want to control. A unique Set ID can be assigned to each set ranging from 1 to 1000(01H~3E8H) under Settings in the OSD menu. Selecting '00H' for Set ID allows the simultaneous control of all connected monitors. (The maximum value may differ depending on the model.) * [Data]: Transmits command data. Data count may increase depending on the command. * [Cr]: C arriage Return. Corresponds to '0x0D' in ASCII code. * []: W hite Space. Corresponds to '0x20' in ASCII code. Acknowledgement [Command2][ ][Set ID][ ][OK/NG][Data][x] * The Product transmits ACK (acknowledgement) based on this format when receiving normal data. At this time, if the data is FF, it indicates the present status data. If the data is in data write mode, it returns the data of the PC computer. * If a command is sent with Set ID '00' (=0x00), the data is reflected to all monitor sets and each monitor set does not send an acknowledgement (ACK). * If the data value 'FF' is sent in control mode via RS-232C, the current setting value of a function can be checked (only for some functions). * Some commands are not supported depending on the model.
![](/manual_guide/products/lg-49uh5c-owners-manual-53ace45/82.png)