LG 49UH5C Owners Manual - Page 91

ENGLISH_index 43. [Natural Mode] (in Tile mode) (Command: d j) When displaying the image naturally, the part of the image that would normally be displayed in the gap between the monitors is omitted. Transmission (d)(j)( )(Set ID)( )(Data)(Cr) Data 00: Off 01: On Acknowledgement (j)( )(Set ID)( )(OK/NG)(Data)(x) * It may not be supported depending on the model. 53 46. [Power On Delay] (Command: f h) Sets the schedule delay when the power turns on. (unit: seconds). Transmission (f)(h)( )(Set ID)( )(Data)(Cr) Data 00~FA: min. 0 to maximum 250 (seconds) * The maximum value may differ depending on the model. Acknowledgement (h)( )(Set ID)( )(OK/NG)(Data)(x) 44. [DPM Select] (Command: f j) To set the DPM (Display Power Management) function. Transmission (f)(j)( )(Set ID)( )(Data)(Cr) Data 00: Off 01: 5 seconds 02: 1 0 seconds 03: 1 5 seconds 04: 1 minutes 05: 3 minutes 06: 5 minutes 07: 1 0 minutes Acknowledgement (j)( )(Set ID)( )(OK/NG)(Data)(x) 47. [Fail Over Select] (Command: m i) Selects an input mode for auto switch. Transmission (m)(i)( )(Set ID)( )(Data)(Cr) Data 00: Off 01: Auto 02: Manual Acknowledgement (i)( )(Set ID)( )(OK/NG)(Data)(x) 45. [Remote Control] / [Local Key Lock] (Command: k m) Adjusts the remote control/local key (front) lock. Transmission (k)(m)( )(Set ID)( )(Data)(Cr) Data 00: O ff (Lock Off) 01: O n (Lock On) * When the monitor is turned off, the power key works even in On (01) mode. Acknowledgement (m)( )(Set ID)( )(OK/NG)(Data)(x)