LG 65EJ5E Owners Manual - Page 101
Product Serial Number Command: f y, Set [Default] Command: f k
View all LG 65EJ5E manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 101 highlights
ENGLISH 64 21. Set [Default] (Command: f k) Executes Reset. Initialize Screen can only be executed in RGB input mode. Transmission (f)(k)( )([Set ID])( )(Data)(Cr) Data 00: Picture Reset 01: Initialize Screen 02: Reset to Initial Settings Acknowledgment (k)( )([Set ID])( )(OK/NG)(Data)(x) * This feature may not be supported on some models. 24. Time Elapsed (Command: d l) Displays the time that has elapsed after your monitor has turned on. Transmission (d)(l)( )([Set ID])( )(Data)(Cr) Data FF: Reads status Acknowledgment (l)( )([Set ID])( )(OK/NG)(Data)(x) * The data received is displayed in hexadecimal. 22. Current Temperature (Command: d n) Checks the current temperature of the product. Transmission (d)(n)( )([Set ID])( )(Data)(Cr) Data FF: Check status Acknowledgment (n)( )([Set ID])( )(OK/NG)(Data)(x) * The temperature is displayed in hexadecimal. 23. [Key] (Command: m c) Sends a key code for the IR remote control. Transmission (m)(c)( )([Set ID])( )(Data)(Cr) Data IR_KEY_CODE Acknowledgment (c)( )([Set ID])( )(OK/NG)(Data)(x) For key codes, see IR Codes. * Some key codes may not be supported on some models. 25. Product Serial Number (Command: f y) Checks the serial number of the product. Transmission (f)(y)( )([Set ID])( )(Data)(Cr) Data FF: Checks product serial number Acknowledgment (y)( )([Set ID])( )(OK/NG)(Data)(x) Data is in ASCII format. 26. Software Version (Command: f z) Checks the software version of the product. Transmission (f)(z)( )([Set ID])( )(Data)(Cr) Data FF: Checks software version Acknowledgment (z)( )([Set ID])( )(OK/NG)(Data)(x)