LG 65EJ5E Owners Manual - Page 110
Scan Inversion] Command: s n
View all LG 65EJ5E manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 110 highlights
64. [Scan Inversion] (Command: s n, 87) Turns on/off Scan Inversion. Transmission (s)(n)( )([Set ID])( )(8)(7)( )(Data)(Cr) Data 00: [Off] 01: [On] Acknowledgment (n)( )([Set ID])( )(OK/NG)(8)(7)(Data)(x) * This feature may not be supported on some models. * Video wall models require to be rebooted for the normal operation after the values are changed. 65. [Beacon] (Command: s n, 88) Turns on/off Beacon. Transmission (s)(n)( )([Set ID])( )(8)(8)( )(Data)(Cr) Data 00: [Off] 01: [On] Acknowledgment (n)( )([Set ID])( )(OK/NG)(8)(8)(Data)(x) * This feature may not be supported on some models. 66. [Brightness Scheduling] Mode (Command: s m) Selects a Brightness Scheduling mode. Transmission (s)(m)( )([Set ID])( )(Data)(Cr) Data 00: Brightness Scheduling off 01: Brightness Scheduling on * This feature does not work if the current time is not set. * This feature may not be supported on some models. Acknowledgment (m)( )([Set ID])( )(OK/NG)(Data)(x) 73 67. [Brightness Scheduling] (Command: s s) Sets Brightness Scheduling. Transmission (s)(s)( )([Set ID])( )(Data1)( )(Data2)( )(Data3)(Cr) Data1 1. f1 to f6 (data reading) F1: Reads the 1st brightness schedule's data F2: Reads the 2nd brightness schedule's data. F3: Reads the 3rd brightness schedule's data. F4: Reads the 4th brightness schedule's data. F5: Reads the 5th brightness schedule's data. F6: Reads the 6th brightness schedule's data. FF: Reads all stored lists 3. e1 to e6 (Deletes one index), e0 (Deletes all indexes) E0: Deletes all brightness schedules. E1: Deletes the 1st brightness schedule. E2: Deletes the 2nd brightness schedule. E3: Deletes the 3rd brightness schedule. E4: Deletes the 4th brightness schedule. E5: Deletes the 5th brightness schedule. E6: Deletes the 6th brightness schedule. 4. 00 to 17: Hour 00 to hour 23 Data2 00 to 3B: Minute 00 to minute 59th Data2 00 to 64: Backlights 0 to 100 * To read or delete a brightness schedule you have set, [Data2] [Data3] must be set to FF. * If you want to read all configured brightness schedules through FF, do not enter any values in [Data2][Data3]. * When all configured brightness schedules are read through FF, OK is acknowledged even if there is no stored list. Example 1: fd 01 f1 ff ff - Reads the 1st index data in Brightness Scheduling. ex2: sn 01 1b ff ff ff ff - Reads all index data in in Brightness Scheduling. Example 3: fd 01 e1 ff ff - Deletes the 1st index data in Brightness Scheduling. Example 4: ss 01 07 1E 46 - Adds a schedule whose time is 07:30 and whose backlight is 70. * This feature may not be supported on some models. Acknowledgment (s)( )([Set ID])( )(OK/NG)(Data1)(Data2)(Data3)(x) ENGLISH