LG 75TC3D Owners Manual - Page 102
Screen Fault Detection] Command: t z, Daylight Saving Time] Command: s d, PM Mode] Command: s n, 0c
View all LG 75TC3D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 102 highlights
69 ENGLISH Data 08 (when checking the temperature of each temperature sensor when the monitor set was last powered off) Acknowledgment (v)( )([Set ID])( )(OK/NG)(Data)(Data1) (Data2)(Data3)(x) Data1 The temperature of the Top sensor when the monitor set was last powered off. Data2 The temperature of the Bottom sensor when the monitor set was last powered off. Data3 The temperature of the Main sensor when the monitor set was last powered off. Data 09 (when checking the fan speed) Acknowledgment (v)( )([Set ID])( )(OK/NG)(Data)(Data1)(Data2)(x) Data1 00-ff: The upper 1-byte of the fan speed Data2 00-ff: The lower 1-byte of the fan speed Fan speed: 0 to 2008 in hexadecimal and 0 to 8200 in decimal * This feature may not be supported on some models. 47. [Screen Fault Detection] (Command: t z) Sets the Screen Fault Detection feature. Transmission (t)(z)( )([Set ID])( )(Data)(Cr) Data 00: [Off] 01: [On] Acknowledgment (z)( )([Set ID])( )(OK/NG)(Data)(x) * This feature may not be supported on some models. 48. [Daylight Saving Time] (Command: s d) Sets Daylight Savings Time. Transmission (s)(d)( )([Set ID])( )(Data1)( )(Data2)( ) (Data3)( ) (Data4)( )(Data5)( )(Cr) Data1 00: [Off] (Data2-5: FF) 01: Start time 02: End time Data2 01-0C: January to December Data3 01 to 06: Weeks 1 to 6 * The maximum value of [Data3] may vary depending on the date. Data4 00 to 06 (Sunday to Saturday) Data5 00 to17: Hour 00 to hour 23 * If you wish to read the start/end times, enter FF for parameters [Data2] through [Data5]. (E.g. 1: sd 01 01 ff ff ff ff - Checks the end time.) (E.g. 2: sd 01 02 ff ff ff ff - Checks the start time.) * This feature only works when Clock 1 (year/month/day) and Clock 2 (hour/minute/second) have been set. Acknowledgment (d)( )([Set ID])( )(OK/NG)(Data1)(Data2) (Data3)(Data4)(Data5)(x) * This feature may not be supported on some models. 49. [PM Mode] (Command: s n, 0c) Sets the PM mode. Transmission (s)(n)( )([Set ID])( )(0c)( )(Data)(Cr) Data 00: Activates Power Off mode 01: Activates [Sustain Aspect Ratio] mode 02: Activates [Screen Off] mode 03: Activates [Screen Off Always] mode 04: Activates [Screen Off & Backlight] mode Acknowledgment (n)( )([Set ID])( )(OK/NG)(0c)(Data)(x) * This feature may not be supported on some models.