LG 75TC3D Owners Manual - Page 92
Transmission/Reception Protocol
View all LG 75TC3D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 92 highlights
ENGLISH 59 Transmission/Reception Protocol Transmission (Command1)(Command2)( )(Set ID)( )(Data)(Cr) * (Command1): Identifies between the factory setting and the user setting modes. * (Command 2): This command is used to control the monitor. * (Set ID): Used for selecting a set you want to control. A unique Set ID can be assigned to each set ranging from 1 to 1000 (01H to FFH) under Settings in the OSD menu. Selecting '00H' for Set ID allows the simultaneous control of all connected monitors. (The maximum value may differ depending on the model.) * (Data): Transmits command data. Data count may increase depending on the command. * (Cr): Carriage Return. This parameter corresponds to '0 x 0D' in ASCII code. * ( ): White Space. This parameter corresponds to '0 x 20' in ASCII code. Acknowledgment (Command2)( )(Set ID)( )(OK/NG)(Data)(x) * The product transmits an ACK (acknowledgment) based on this format when receiving normal data. At this point, if the data is FF, it indicates the present status data. If the data is in data write mode, it returns the data of the PC computer. * If a command is sent with Set ID '00' (= 0 x 00), the data is reflected to all monitors and they do not send an acknowledgment (ACK). * If you send "FF" as the value of the data in control mode via RS-232C, you can check the value currently set for the relevant feature (not applicable to some features). * Some commands may not be supported on some models.