LG AM501YWM1 Owners Manual - Page 27
Smart Diagnosis™
View all LG AM501YWM1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
ENGLISH FCC RF Radiation Exposure Statement This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. This equipment should be installed and operated with minimum distance 20 cm (7.8 inches) between the antenna and your body. Users must follow the specific operating instructions for satisfying RF exposure compliance. Smart Diagnosis™ Should you experience any problems with your appliance, it has the capability of transmitting data to your smartphone using the LG Smart ThinQ application or via your telephone to the LG Customer Information Center. Smart Diagnosis™ cannot be activated unless the appliance can be turned on. If the appliance is unable to turn on, then troubleshooting must be done without using Smart Diagnosis™. Open Source Software Notice To obtain the source code contained in this product and developed under GPL, LGPL, MPL and other open source licenses, visit http://opensource.lge.com In addition to the source code, all referred license terms, warranty disclaimers, and copyright notices are available for download. LG Electronics will also provide open source code on CDROM for a charge covering the cost of performing such distribution (such as the cost of media, shipping, and handling) upon email request to [email protected]. This offer is valid for three (3) years from the date on which you purchased the product. Diagnosis with Wi-Fi 1 Make sure the appliance is connected to Wi-Fi. 2 Open the Smart ThinQ application and select the appliance from the list of registered products. Press the menu at the top right of the smartphone screen. 3 Select Smart Diagnosis™ in the application and then select the Smart Diagnosis™ button. •• Check the results in the application. If Wi-Fi Diagnosis Fails •• Smart Diagnosis™ may not succeed if the network connection is not good. Select Retry in the application to try again. •• If the Wi-Fi Smart Diagnosis™ fails again, select Audible Diagnosis in the application and follow the instructions to perform an audible diagnosis. Note For a more detailed diagnosis, contact an LG Customer Information Center. 27