LG AN-WL100 Owners Manual - Page 16

EXTERNAL EQUIPMENT SETUP SUPPORTED DISPLAY RESOLUTION RGB-PC, HDMI/DVI-PC mode Resolution Horizontal Vertical Frequency(kHz) Frequency(Hz) 720x400 640x480 800x600 1024x768 1280x768 1360x768 1280x1024 1920x1080 (RGB-PC) 1920x1080 (HDMI-PC) 31.468 31.469 37.879 48.363 47.78 47.72 63.981 66.587 67.5 70.08 59.94 60.31 60.00 59.87 59.80 60.02 59.93 60.00 EXTERNAL EQUIPMENT SETUP NOTE ŹThere may be interference relating to resolution, vertical pattern, contrast or brightness in PC mode. Change the PC mode to another resolution or change the refresh rate to another rate or adjust the brightness and contrast on the menu until the picture is clear. If the refresh rate of the PC graphic card can not be changed, change the PC graphic card or consult the manufacturer of the PC graphic card. ŹThe synchronization input waveform for Horizontal and Vertical frequencies are separate. ŹConnect the signal cable from the monitor output port of the PC to the RGB (PC) port of the Wireless Media Box or the signal cable from the HDMI output port of the PC to the HDMI IN (or HDMI/DVI IN) port on the Wireless Media Box. ŹConnect the audio cable from the PC to the Audio input on the Wireless Media Box. (Audio cables are not included with the Wireless Media Box). ŹDOS mode may not work depending on the video card if you use an HDMI to DVI cable. ŹIf you use too long an RGB-PC cable, there may be interference on the screen. We recommend using under 5m of cable. This provides the best picture quality. ŹWhen an unsupported resolution or graphic card is used on the PC, it may cause some errors. 16