LG CF3DAT Owners Manual - Page 37

Function Connect the LAN port of the projector to the LAN port of the PC or router using a LAN cable. LAN cable Connecting to a PC 1. Press the MENU button, then go to OPTION with the buttons and press OK ㅦ 2. Press the ˭
ˮ buttons to go to Network Setting and press OK ㅦ 3. Press the ʻ
ʼ buttons to select On for LAN option. OPTION ꔂ Move ꔉ OK Menu Language Netwo:rKkodroeeasn not exist. Audio Language Do you want to reset? Caption Blank Image : Text 1 LA: NBlue ꔗ Off ꔃ Camera Calibration Lamp Mode IP Auto Setting : Normal High Altitude IP Manual Setting Network Setting Set ID Close : On 4. Press the ˭
ˮ buttons to go to IP Auto Setting or IP Manual Setting and press OK
ㅦ ꔈ Select IP Auto Setting for a server PC. ꔈ Select IP Manual Setting for an ordinary PC. - PC Setup: Set the Internet Protocol (TCP/IP) of the PC at your own discretion. Projector Setup:Set the IP Address as the same IP Address format of the PC, and select Close after entering the same gateway as the PC. Please refer to the eZ-Net Manager Guide for details of network settings. :: Example:: PC Projector IP Address 192.168.0.10 192.168.0.254 Subnet Mask 255.255.255.0 255.255.255.0 Gateway 192.168.0.1 192.168.0.1 IP Address ꔌ1 9 2 1 6 8 ꔍ Subnet Mask ꔁ Move ꔉ OK 000 254 255 255 255 000 Gateway 192 168 000 001 Close ꔈ If Network Setting is not working, check your network status and the LAN cable connection. ꔈ If Network Setting is not completed, network functions may not work properly. ꔈ IP Auto Setting: Select this if there is a DHCP (Dynamic Host Configuration Protocol) server on the local area network (LAN) via a wired connection; the projector will automatically be allocated an IP address. It may not be possible to connect to DHCP if a firewall is installed or depending on the model of the computer. IP Manual Setting: Select IP Manual Setting if there is no DHCP server on the network and you want to set the IP address manually. ꔈ Press the BACK button to exit the menu screen. 37