LG CR5765GD Owners Manual - Page 30
MOP CLEANING on some models
View all LG CR5765GD manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 30 highlights
MOP CLEANING (on some models) Remove dust on hard floors by attaching the ultra microfiber mop to the Robot Cleaner. When the mop plate is attached, the Robot Cleaner will not climb on to carpets or over thresholds, in order to prevent transferring dirt from the mop. Mounting the Mop and Mop Plate 1. A ttach the ultra microfiber mop to the Velcro of the mop plate as shown in the figure. Caution Do not cover the bottom camera sensor with the mop. 2. Firmly slide the mop plate into the grooves until you hear a click. ※ If the mop plate is not secured correctly, it may separate during cleaning. 3. It is essential that the fixing hooks on the mop plate align correctly with the fixing grooves on the underside of the cleaner. Fixing hook "Click!" Fixing groove Tip • To avoid odors, wash any foreign material or dust off the mop after cleaning is completed. • To avoid staining floors, do not use the ultra microfiber mop to clean when dirt is contaminated with liquids such as coffee or ink. • To avoid damage to carpets from the Velcro or dirt transfer from the mop, do not attempt to clean carpets while the mop plate or mop is attached. • Keep the ultra microfiber mop dry. Do not use it on wet surfaces. If there is moisture on the floor, it can interfere with the navigation and damage the unit. • The Smart Diagnosis™ feature is not available when the mop plate is attached. 30