LG CR5765GD Owners Manual - Page 32
Smart Diagnosis™
View all LG CR5765GD manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 32 highlights
SMART DIAGNOSIS™ Robot Cleaner uses the Smart Diagnosis feature to run a self-diagnosis. If any irregularity is found from the diagnosis, contact the local LG Electronics service center. ※ During Smart Diagnosis, the Robot Cleaner moves about within a 13/8 ft. (50 cm) radius. So, make sure no objects are in the way within a 31/4 ft. (1 m) radius around the home station, before starting Smart Diagnosis. 1. Smart Diagnosis will operate when the main power switch of the Robot Cleaner and the home station are turned on, and the unit is docked on the home station. ※ Smart Diagnosis is only possible when the Robot Cleaner is attached to the home station. 2. Press the Diagnosis button on the remote, then the process will start with a voice message which says "Robot Cleaner Smart Diagnosis will be started. Please step away and clear around 1 meter around the home station." ※ If the Mop Plate is attached, the process will not be activated. 3. When the Smart Diagnosis has successfully finished, Robot Cleaner will return back to the Home Station and inform you of the result through a voice message. After the voice message, pressing the Home button on the remote or main unit will allow the voice message to be repeated. To terminate the diagnosing process, press the button on the remote or main unit. ※ After the Smart Diagnosis voice message, the Robot Cleaner will start recharging after 1 minute. ※ If an error is detected with any of the sensors while in Smart Diagnosis, a voice message will announce, and the unit will not return to the home station. Tip • Be careful not to touch the Robot Cleaner or disturb its operation before Smart Diagnosis is complete. If it is accidentally interrupted, turn the main power switch OFF then ON again to resume the diagnosis. • Smart Diagnosis will not be activated in each of the following cases. In each case, check the problem and try again. - Robot Cleaner is detached from the home station. - Battery level is insufficient - No Dust Bin Filter is fitted. 32 - Mop Plate is attached