LG CRD-8240B Owners Manual - Page 10

Mounting The Cd-rom Drive

Get LG CRD-8240B PDF manuals and user guides View all LG CRD-8240B manuals
Add to My Manuals
Save this manual to your list of manuals

Page 10 highlights

MOUNTING THE CD-ROM DRIVE Step 1. Turn off and unplug your computer and all peripheral devices attached to it. Step 2. Remove the cover from your computer. Step 3. Remove the front panel from an unused half-height slot. Figure 6. Removing the Floppy Disk Drive and the Blanking plate Figure 7. Mounting the Drive Step 4. Slide the CD-ROM drive into the half-height slot, and secure the drive in place with screws and brackets. Note: If there is too much space between the sides of the drive and the drive bay, you may need to install spacer brackets, available at your local computer store. Pin assignment The pin assignment of the power-in connector is as follows: 5V DC 12V DC GND Step 5. Push the power supply cable connector firmly into the power in connector. Power supply connector (4-pin connection cable) Figure 8. Connecting the Power Supply Cable E-10

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
MOUNTING THE CD-ROM DRIVE
Step 1.
Turn off and unplug your
computer and all peripheral
devices attached to it.
Step 2.
Remove the cover from your
computer.
Step 3.
Remove the front panel from an
unused half-height slot.
Step 4.
Slide the CD-ROM drive into the
half-height slot, and secure the
drive in place with screws and
brackets.
Note:
If there is too much space between
the sides of the drive and the drive
bay, you may need to install spacer
brackets, available at your local
computer store.
Step 5.
Push the power supply cable
connector firmly into the power in
connector.
E-10
Figure 6. Removing the Floppy Disk
Drive and the Blanking plate
Figure 7. Mounting the Drive
Power supply connector
(4-pin connection cable)
Figure 8. Connecting the Power
Supply Cable
GND
Pin assignment
The pin assignment of the power-in
connector is as follows:
12V DC
5V DC