LG CRD-8240B Owners Manual - Page 14
ATAPI Installation Windows 95 and others - goldstar driver
View all LG CRD-8240B manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
ATAPI Installation (Windows 95 and others) * For Windows 95 installation, do not use the installation diskette supplied. This CDROM drive is Windows 95, Windows NT 3.5, and OS/2 Warp compatible, generally utilizing the generic software drivers supplied with those operating systems Below is the example installing the driver for Windows 95. For other operating systems, try looking for either a LG Electronics or Goldstar IDE CD-ROM drive software driver. If none is found, try selecting one of the device drivers for Non-listed IDE CD-ROM . (For Windows 95) 1. Install the CD-ROM drive in your PC as described in this manual. 2. Power up your PC. Upon starting Windows 95, it might automatically detect the new CD-ROM drive and load the driver software for it. If not, proceed to the next step. 3. In Windows 95, Click on the Start button. Click on the Settings button. Click on the Control Panel button. Double-Click on the Add New Hardware icon. Follow the instructions for the computer to search your system for new hardware. It will locate the CD-ROM drive and load the generic driver. TROUBLESHOOTING * When the CD-ROM drive does not work with the hard disk drive in primary IDE channel. (SOLUTION) 1. Check the CD-ROM drive Master/Slave Jumper setting. The CD-ROM drive must be set to the Slave mode. 2. Check to be sure your hard disk Interface type is IDE type. 3. Check your hard disk Master/Slave Jumper setting. Some old-version IDE type hard disks were set to Master Only mode. In that case, contact your hard disk company and change your hard disk jumper setting to master mode. 4. If the CD-ROM drive does not work with above methods, you may need a secondary IDE card. If you use the secondary IDE card, you should set the CD-ROM drive jumper to the master mode if the CD-ROM drive is the first device you are connecting to the secondary IDE card. * When the CD-ROM drive does not install in OS/2 warp. (SOLUTION) 1. Select NON-LISTED IDE CD. * CD-ROM drive is not present in Windows 3.1 or 3.11 or DOSSHELL. (SOLUTION) 1. When the WTN or DOSSHELL command lines are present in your AUTOEXEC.BAT, make sure that the MSCDEX.EXE command line appears before the WIN or the DOSSHELL command lines. E-14