LG CRD-8240B Owners Manual - Page 11

Connecting An Audio Cable

Get LG CRD-8240B PDF manuals and user guides View all LG CRD-8240B manuals
Add to My Manuals
Save this manual to your list of manuals

Page 11 highlights

Interface connector IDE Cable Pin 1 Red-edge Step 6. Connect the 40-pin IDE Cable to the back of the CD-ROM Drive. Please make sure that the red edge of the IDE Cable is connected to Pin 1 on the CDROM Drive. Figure 9. Connecting the IDE Cable to the Interface Connector CONNECTING AN AUDIO CABLE Pin assignment The pin assignment of the audio output connector is as follows. GND GND R-Channel L-Channel to Audio Equipment (sound card) * Pin assignment of the audio cable GND L-Channel GND R-Channel Audio Cable Figure 10. Connecting an Audio Cable to the Audio Output Connector If you want to connect audio equipment or a sound card to the CD-ROM drive, use an audio cable to connect the drive to the sound device. Disc Clips Note: This CD-ROM Drive can be used vertically. • To use the drive vertically, open the drawer and move the 2 plastic clips on the bottom to hold a disc vertically. After placing a CD into the tray, move the top 2 plastic clips to hold the top of the CD in place. Use only standard 12cm discs. • Do not touch the unlabeled side of the disc. E-11

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
CONNECTING AN AUDIO CABLE
Step 6.
Connect the 40-pin IDE Cable to
the back of the CD-ROM Drive.
Please make sure that the red
edge of the IDE Cable is
connected to Pin 1 on the CD-
ROM Drive.
If you want to connect audio equipment or
a sound card to the CD-ROM drive, use
an audio cable to connect the drive to the
sound device.
Note:
This CD-ROM Drive can be used
vertically.
•
To use the drive vertically, open the
drawer and move the 2 plastic clips on
the bottom to hold a disc vertically. After
placing a CD into the tray, move the top 2
plastic clips to hold the top of the CD in
place. Use only standard 12cm discs.
•
Do not touch the unlabeled side of the
disc.
E-11
Red-edge
Pin 1
Interface
connector
IDE Cable
Figure 9. Connecting the IDE Cable
to the Interface Connector
L-Channel
GND
GND
R-Channel
* Pin assignment of the audio cable
to Audio
Equipment
(sound card)
Audio
Cable
L-Channe
l
GND
GND
R-Channel
Pin assignment
The pin assignment of the
audio output connector is
as follows.
Figure 10. Connecting an Audio Cable
to the Audio Output Connector
Disc Clips