LG DLE9577SM Owners Manual - Page 11

Procedure of Control Panel Change - installation

Page 11 highlights

Part 3 INITIAL STEPS FOR INSTALLING YOUR DRYER STEP 3 Procedure of Control Panel Change ! WARNING! • Disconnect power before servicing. • Replace all parts and panels before operating. • Be careful of the sharp edge on frame which makes you hurt. • Failure to follow these instructions can result in death or electrical shock. Disassemble 1 ⚦ Push the cap on the right side of control panel. ⚧ Remove the screw. ⚨ Slide the control panel to the right about an inch. ⚨ Control Panel Cap ⚦ ⚧ 2 Push the housing hook and disassemble the panel. ! WARNING! Be careful of dropping the control panel. Housing Hook Frame 4 ⚦ Push the cap on the right side of lower cover. ⚧ Remove the screw. ⚨ Slide the lower cover to the right about an inch. ⚨ ⚦ Cap ⚧ Lower, Cover Assemble 1 Remove the safety cover. Safety Cover 2 Attach the housing of control panel until it clicks into place. ! WARNING! Make sure that the housing is attached correctly. If not, the dryer may not operate. 3 Remove the plate by lifting it up slightly. Plate Frame Note Housing LG is not responsible for any damages to your dryer incurred while a customer is changing. 9

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69

9
Part 3
INITIAL STEPS FOR INSTALLING YOUR DRYER
Push the cap on the right side of control
panel.
Remove the screw.
Slide the control panel to the right about
an inch.
STEP 3
Procedure of Control Panel Change
1
Push the housing hook and disassemble the
panel.
2
Remove the safety cover.
1
Attach the housing of control panel until it
clicks into place.
2
Remove the plate by lifting it up slightly.
3
Push the cap on the right side of lower
cover.
Remove the screw.
Slide the lower cover to the right about an
inch.
4
Disassemble
Assemble
WARNING!
WARNING!
!
!
• Disconnect power before servicing.
• Replace all parts and panels before operating.
• Be careful of the sharp edge on frame which makes you hurt.
• Failure to follow these instructions can result in death or electrical shock.
Housing
Hook
Frame
Control Panel
Cap
Plate
Lower, Cover
Cap
Safety Cover
Housing
Frame
LG is not responsible for any damages to your
dryer incurred while a customer is changing.
Note
Be careful of dropping the control panel.
WARNING!
!
Make sure that the housing is attached correctly.
If not, the dryer may not operate.