LG DLEC855W Owner's Manual - Page 8

Installation Instructions I nstallation Instructions Stacking Kit In order to stack this dryer an LG stacking kit is required. Dryer Washer Support Holder F WARNING • Incorrect installation can cause serious accidents. • The weight of the dryer and the height of installation makes the stacking procedure too risky for one person. This procedure should be performed by 2 or more experienced service personnel. • The dryer is not suitable for a built-in installation. Please do not install as a built-in. • Do not operate the dryer is disassembled. 3. Assemble the stacking kit as following. This dryer may only be stacked on top of an LG washer. DO NOT attempt to stack this dryer on any other washer, as damage, injury or property damage could result. To stack this dryer, the support holder included with the stacking kit must be used. • Peel the protective film from the double-sided tape on the bracket for your size washer. • Attaching the support holder. • Align the stacking kit holes and the rear cover holes and then firmly attach the bracket to the side of the washer in that position. 23.6 inch(600 mm) Shape Washer Top plate size 23.6 inch (600mm) 21.7 inch (550mm) Support Holder 21.7 inch(550 mm) Installation Procedure 1. Place the LG dryer on the LG Washing machine. 2. Remove two screws at the bottom of the rear cover on each side as shown below. 4. Assemble a stacking kit as following. • Screw 2 screws which were removed earlier to assemble dryer and stacking kit. • Use accessory screws [1.2inch (30mm)] to assemble washer rear cover and stacking kit. , • The procedure for the opposite side will be the same. 8