LG DLEV833W Owners Manual - Page 8
at [east 2 inches
View all LG DLEV833W manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
nstallat The fo[[ow+ng instructions are applicable to instaltations of the dryer in a manufactured or mobile home+ tf you are uncertain whether your propo_d insia[[ation will comp]y wkh these standards, please contact a _rvice and installation professional for assistance. The following instructions apply to any installation of the dryer in a manufactured or mobile home: 1) Electric dryers may be vent_ to the outside using the back, left, or right+ 2) The dryer exhaust duct must be affixal securely to the manufactured or mobile home structure, and the exhaust duct must be made of a material that will resist fire and combustion, and it is recommend_J that you u_ a rigid or flexible metal pi_, 3) Make sure the dryer has adequate access to outside fresh air to ensure profit of_ration. The o_ning for outside fresh air must _ at [east 25 in _ (163c_) 4) It is imf_rtant that the clearance of the dud from any combustible construction _ at [east 2 inches (5 cm), and, when venthlg the dryer to the outdoors, the dryer can _ insta[[_ with a clearances of 1 inch (2.5 crn) at the sides and back of the dryer. 5) DO NOT connect the exhaust duct with any other duct, vent, chimney, or other exhaust duct. 6) Make sure the dryer has adequate access to ouBide fresh air to ensure pro_r operation. The o_rling for outside fresh air must be at [east 25 in_(163cr_). 7) It is important that the clearance of die duct from any combustible construction be at least 2 inches (5 cm), and, when venting the dryer to the outdoors, the dryer can be installed with a clearance of 1 inch at the sides _d back of the dryer. 8) Please _ aware that venting materials am not supplied with the dryer. You should obtain the venting materials n_:essary for prof_,r insta[iation. metal screwsor fasteners that extend DO NOT vent the exhaust duct under the manufactured or mobile home.