LG DLEX9500K Owners Manual - Page 33
Operating the Dryer
View all LG DLEX9500K manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 33 highlights
ENGLISH OPERATION Operating the Dryer OPERATION 33 1 CLEAN THE LINT FILTER Lint Filter If the lint filter has not already been cleaned, lift out the filter and remove the lint from the last load. This will help ensure the fastest and most efficient drying performance. 2 LOAD THE DRYER Load the dryer with the wet laundry from the washer. If the load is extra large, you may need to divide it into smaller loads for proper performance and fabric care. 3 TURN ON THE DRYER Press the POWER button to turn on the dryer. The cycle LEDs illuminate and a signal sounds, if turned on. Refer to page 11. 4 SELECT A CYCLE Press the cycle selector buttons repeatedly until the desired cycle is selected. The preset temperature, dry level, and option settings for that cycle will be shown. Refer to page 34. Default settings for the selected cycle can now be changed if desired. This can be done using the cycle modifier buttons as shown on page 37. Cycle options can be added using the option buttons as shown on page 37-40. NOTE Not all options or modifiers are available on all cycles. A different chime will sound and the LED will not come on if the selection is not allowed. 5 BEGIN CYCLE Press and hold the Start button to begin the cycle. The cycle can be paused at any time either by opening the door or by pressing the Start button. If the cycle is not restarted within 4 minutes, the dryer will shut off and the cycle settings will be lost. 6 END OF CYCLE When the cycle is finished, the chime will sound if it is set. Remove your clothing from the dryer immediately to reduce wrinkling. If WRINKLE CARE is selected, the dryer will tumble briefly every few minutes to help prevent wrinkles from setting in the clothes.